Learn with Anil · APPSC AMVI (Assistant Motor Vehicle Inspector) PYQsPractise online →Subscribe ₹149

APPSC AMVI 2019 Paper 2 Automobile Engineering question paper with answers

APPSC Assistant Motor Vehicle Inspector 2019: Paper II (Automobile Engineering). Paper II: Automobile Engineering. APPSC's final key prints each question with only its correct answer, so these are quick-recall questions, in English. Notification 11/2018 · answer-only key, held on 17 April 2019. Each question with its official answer from APPSC's final key (the key lists the correct answer only), plus a short explanation for every question (the first 10 here, all of them in the app).

ఏపీపీఎస్సీ అసిస్టెంట్ మోటార్ వెహికల్ ఇన్‌స్పెక్టర్ (AMVI) పేపర్-2 ఆటోమొబైల్ ఇంజనీరింగ్ 2019 ప్రశ్నపత్రం సమాధానాలతో

Attempt this paper · 147 min timerMake a topic-wise quiz

The correct answer to every question is free on this page, and so are the explanations of the first 10. For all 147 explanations, practise the paper in the app with the ₹149 All-in-One Pass, one payment for every exam on the site.

Subjects in this paper

All 147 questions

  1. Q1 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following is true for open system?

    Show answer

    Answer: Mass can transfer, energy can transfer

    An open system (control volume) is one whose boundary allows both mass and energy (heat and work) to cross, for example an engine cylinder during intake and exhaust, a compressor, a turbine or a nozzle. A closed system allows only energy transfer with a fixed mass (a piston-cylinder with the valves shut), and an isolated system allows neither mass nor energy to cross its boundary.

  2. Q2 · Thermodynamics & Heat Transfer · Thermodynamics

    A piston cylinder contains air at 600 kPa, 290 K and a volume of 0.01m^3. A constant pressure process gives 60 kJ of work out. Find the final volume of the air.

    Show answer

    Answer: 0.11 m^3

    In a constant-pressure process the boundary work is W = p(V₂ − V₁). So 60 kJ = 600 kPa × (V₂ − 0.01) m³, giving V₂ − 0.01 = 60/600 = 0.1 m³ and V₂ = 0.11 m³. The temperature (290 K) is not needed for the volume; it would be used to find the mass of air, m = pV/RT = 600 × 0.01/(0.287 × 290) ≈ 0.072 kg.

  3. Q3 · Thermodynamics & Heat Transfer · Thermodynamics

    As per kinetic theory of gases, value of gamma for monoatomic gases, diatomic gases and polyatomic gases are

    Show answer

    Answer: 5/3, 7/5, 4/3

    Kinetic theory gives γ = cp/cv = 1 + 2/f, where f is the number of degrees of freedom of the molecule. A monatomic gas (He, Ar) has 3 translational degrees, so γ = 5/3 ≈ 1.67; a diatomic gas (O₂, N₂, air) has 5 (3 translational + 2 rotational), so γ = 7/5 = 1.4; a non-linear polyatomic gas has 6, so γ = 8/6 = 4/3 ≈ 1.33 (vibrational modes neglected).

  4. Q4 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    __________ is the compression ratio for positive ignition (PI) engine.

    Show answer

    Answer: 6 to 10

    Positive (spark) ignition engines are usually given compression ratios of about 6 to 10, because a higher ratio raises the temperature and pressure of the end gas and causes knock (detonation) with ordinary petrol. Compression ignition (diesel) engines use about 16 to 22, since they need hot compressed air for self-ignition of the fuel. Modern petrol engines with knock sensors and direct injection often run above 10:1.

  5. Q5 · Thermodynamics & Heat Transfer · Thermodynamics

    The ratio of specific heat at constant volume (cv) and specific heat at constant pressure (cp) is

    Show answer

    Answer: < 1

    cp − cv = R, so cp is always larger than cv: at constant pressure part of the heat supplied does expansion work, while at constant volume all of it raises the internal energy. Hence cp/cv = γ > 1 (1.4 for air), and the ratio asked, cv/cp = 1/γ, is less than 1 (about 0.714 for air).

  6. Q6 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    One kg of hydrogen requires __________ kg of oxygen to produce ---- kg water.

    Show answer

    Answer: 8,9

    The combustion equation is 2H₂ + O₂ → 2H₂O. By mass, 4 kg of hydrogen combines with 32 kg of oxygen to form 36 kg of water. Dividing by 4, 1 kg of hydrogen needs 8 kg of oxygen and produces 9 kg of water. This 9 kg per kg figure is used to find the water in the products when working out the higher and lower calorific values of a fuel.

  7. Q7 · Fluid Mechanics & Hydraulics · Fluid Mechanics

    The value of 1 cm of Hg is equal to

    Show answer

    Answer: 1333 N/m²

    The pressure of a liquid column is p = ρgh. For mercury (ρ ≈ 13,600 kg/m³), 1 cm Hg = 13,600 × 9.81 × 0.01 ≈ 1334 N/m²; with the standard values (13,595 kg/m³ and 9.80665 m/s²) it is 1333.2 N/m², i.e. about 1333 Pa. Hence 76 cm Hg, the standard atmosphere, is 1.013 × 10⁵ N/m².

  8. Q8 · Fluid Mechanics & Hydraulics · Fluid Mechanics

    Which of the following is correct pressure co-relation?

    Show answer

    Answer: Absolute pressure = Gauge pressure + Atmospheric pressure

    A pressure gauge reads pressure relative to the local atmosphere, so absolute pressure = gauge pressure + atmospheric pressure. Below atmospheric pressure, absolute pressure = atmospheric pressure − vacuum pressure. Thermodynamic relations such as pV = mRT always use absolute pressure; for example, a tyre inflated to 2 bar gauge holds air at about 3.01 bar absolute.

  9. Q9 · Thermodynamics & Heat Transfer · Thermodynamics

    Availability of a system is depending on the

    Show answer

    Answer: State of a system and surrounding

    Availability (exergy) is the maximum useful work obtainable as a system is brought into equilibrium with its surroundings (the dead state). It therefore depends both on the state of the system (p, T, composition) and on the state of the surroundings (p₀, T₀); for a closed system, availability = (U − U₀) + p₀(V − V₀) − T₀(S − S₀). A system already at the dead state has zero availability.

  10. Q10 · Thermodynamics & Heat Transfer · Thermodynamics

    Calculate the enthalpy of 25 kg of fluid that occupies a volume of 12000 litre, if the internal energy is 28000000 J /kg and the pressure is 0.3 MN/m²

    Show answer

    Answer: 703.6 MJ

    Enthalpy H = U + pV. The internal energy U = 25 kg × 28,000,000 J/kg = 700 MJ. The volume is 12,000 litres = 12 m³, so pV = 0.3 × 10⁶ N/m² × 12 m³ = 3.6 MJ. Therefore H = 700 + 3.6 = 703.6 MJ, and the specific enthalpy is 703.6/25 = 28.144 MJ/kg.

  11. Q11 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The process of cleaning the cylinder, after the expansion stroke, is called

    Show answer

    Answer: Scavenging

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  12. Q12 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Which of the following is an advantage of a compression swirl?

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  13. Q13 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    In a 4- stroke compression ignition (CI), the fuel is injected about

    Show answer

    Answer: 15° before top dead centre

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  14. Q14 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    A cetane number of C₁₀H₇CH₃is __________

    Show answer

    Answer: 0

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  15. Q15 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    In S.I. engine, Raising the coolant temperature__________

    Show answer

    Answer: Decreases delay period

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  16. Q16 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The ratio of the actual volume of gas taken into the cylinder during suction stroke to the piston displacement volume is called

    Show answer

    Answer: Volumetric efficiency

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  17. Q17 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Morse test is used to calculate __________

    Show answer

    Answer: Brake Power

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  18. Q18 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    __________ is not an integral part of a carburettor

    Show answer

    Answer: Fuel Pump

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  19. Q19 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Usually crankcase is made of -------

    Show answer

    Answer: both Aluminium and Cast iron

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  20. Q20 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Inside a cylinder, dissociation is __________ temperature.

    Show answer

    Answer: Increases with

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  21. Q21 · Engineering Mechanics & Machine Design · Theory of Machines

    __________ is used to connect non-intersecting and non-parallel shafts

    Show answer

    Answer: Spiral gears

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  22. Q22 · Engineering Mechanics & Machine Design · Machine Design

    __________ is the advantage of gear drive as compared to belt, rope and chain drives

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  23. Q23 · Engineering Mechanics & Machine Design · Theory of Machines

    The diametral pitch of a gear is given by, Where, D=Pitch circle diameter T= Number of teeth,

    Show answer

    Answer: T/D

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  24. Q24 · Engineering Mechanics & Machine Design · Theory of Machines

    Contact ratio is known as __________

    Show answer

    Answer: Length of arc of contact / the circular pitch of a gear

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  25. Q25 · Engineering Mechanics & Machine Design · Theory of Machines

    Mitre gears are used for

    Show answer

    Answer: equal speed

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  26. Q26 · Engineering Mechanics & Machine Design · Theory of Machines

    In worm and wheel, the shaft axes are

    Show answer

    Answer: Perpendicular to each other

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  27. Q27 · Engineering Mechanics & Machine Design · Theory of Machines

    The number of teeth on each of the two equal spur gears in mesh are 35 and the module is 6 mm then, __________ is the circular pitch.

    Show answer

    Answer: 18.8

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  28. Q28 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    The following is the chemical formula of is o-octane

    Show answer

    Answer: C₈H₁₈

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  29. Q29 · Engineering Mechanics & Machine Design · Engineering Mechanics

    Fluid friction between two lubricated surfaces are due to

    Show answer

    Answer: Viscosity and Oiliness

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  30. Q30 · Engineering Mechanics & Machine Design · Engineering Mechanics

    Coefficient of Friction is,__________

    Show answer

    Answer: limiting friction (F) / Normal reaction (R_N) between the two bodies

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  31. Q31 · Engineering Mechanics & Machine Design · Machine Design

    Nominal diameter and core diameter of the screw thread is denoted by d₀ and dc respectively, then the mean diameter of the screw is given by __________

    Show answer

    Answer: (d0 + dc)/2

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  32. Q32 · Engineering Mechanics & Machine Design · Theory of Machines

    In a screw jack, the effort required to lift the load S is __________ Where, A = Helix angle, and B = Angle of friction

    Show answer

    Answer: P = S tan (A+ B)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  33. Q33 · Engineering Mechanics & Machine Design · Machine Design

    The capacity of a brake depends upon __________

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  34. Q34 · Automobile Chassis & Transmission · Brakes

    A vehicle’s brake efficiency is affected by

    Show answer

    Answer: Both Vehicle weight and braking effort

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  35. Q35 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The Indicated power of an engine is __________ the brake power

    Show answer

    Answer: >

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  36. Q36 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Petrol car engine has four cylinders of 75 mm bore and 85 mm stroke with 8 compression ratios, __________ is the cubic capacity of the engine

    Show answer

    Answer: 376

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  37. Q37 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    The calorific value of diesel is about

    Show answer

    Answer: 42.5 MJ/kg

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  38. Q38 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    4 cylinder in-line engine has a __________ firing order

    Show answer

    Answer: 1-3-4-2

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  39. Q39 · Thermodynamics & Heat Transfer · Thermodynamics

    __________is known as entropy principle

    Show answer

    Answer: Second law of thermodynamics

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  40. Q40 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    The specific gravity of the engine lube oils varies between __________

    Show answer

    Answer: 0.85 to 0.96

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  41. Q41 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    __________ torque is required to produce 500 HP at 3000 rpm

    Show answer

    Answer: 1187 N-m

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  42. Q42 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    In a vehicle, Permeation through the walls of plastics tanks is controlled by __________

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  43. Q43 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Diesel NOₓ is __________ with cetane number and __________ as aromatic content is lowered

    Show answer

    Answer: increases, decreases

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  44. Q44 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    __________ (TBFI) are a substitution of electromechanical replacement for the carburettor

    Show answer

    Answer: Throttle Body Fuel Injector

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  45. Q45 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Complete a catalytic reaction: NO + CO = __________ + CO₂

    Show answer

    Answer: ½ N₂

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  46. Q46 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Which of the following material is not used in three way catalytic converter as a catalyst?

    Show answer

    Answer: Iron

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  47. Q47 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    __________ is used to control the particulates from a diesel engine

    Show answer

    Answer: Diesel Particulate Filter

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  48. Q48 · Thermodynamics & Heat Transfer · Thermodynamics

    An Isobaric process is a

    Show answer

    Answer: Constant pressure process

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  49. Q49 · Engineering Mechanics & Machine Design · Strength of Materials

    1 MPa (Mega Pascal): __________ N/mm²

    Show answer

    Answer: 1 ×10^0

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  50. Q50 · Engineering Mechanics & Machine Design · Strength of Materials

    __________ is correct expression for Poisson’s ratio

    Show answer

    Answer: Lateral strain / Longitudinal strain

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  51. Q51 · Engineering Mechanics & Machine Design · Strength of Materials

    Hook’s law holds good up to

    Show answer

    Answer: Elastic Limit

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  52. Q52 · Engineering Mechanics & Machine Design · Strength of Materials

    Normal Strain may be

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  53. Q53 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following property is dependent on a mass of a thermodynamic system?

    Show answer

    Answer: Volume

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  54. Q54 · Thermodynamics & Heat Transfer · Thermodynamics

    Law: “The change of internal energy of a perfect gas is directly proportional to the change of temperature” is known as

    Show answer

    Answer: Joule’s law

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  55. Q55 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following is the correct expression to corelate gas constant (R) and constant volume specific heat (CV)?

    Show answer

    Answer: γ = 1 + R/CV

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  56. Q56 · Thermodynamics & Heat Transfer · Thermodynamics

    Efficiency of a cycle is considered as

    Show answer

    Answer: Workdone / Heat Supplied

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  57. Q57 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The volumetric efficiency of the SI engine is comparatively

    Show answer

    Answer: Lower than CI engine

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  58. Q58 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Working cycle of a 4- stroke engine is complete in

    Show answer

    Answer: Two revolution of the crankshaft

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  59. Q59 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Stoichiometric fuel- air ratio of a gasoline is

    Show answer

    Answer: 1: 15

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  60. Q60 · Materials, Manufacturing & Metrology · Engineering Materials

    Which of the following is not a types of cast iron?

    Show answer

    Answer: Permanent cast iron

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  61. Q61 · Materials, Manufacturing & Metrology · Engineering Materials

    __________ has a maximum ductility

    Show answer

    Answer: Copper

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  62. Q62 · Materials, Manufacturing & Metrology · Engineering Materials

    Medium carbon steel is used to make

    Show answer

    Answer: Crankshafts

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  63. Q63 · Materials, Manufacturing & Metrology · Engineering Materials

    __________ property is necessary in stamping images on coins

    Show answer

    Answer: Plasticity

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  64. Q64 · Materials, Manufacturing & Metrology · Engineering Materials

    __________ is a measure of the ability of a material to absorb energy up to fracture

    Show answer

    Answer: Toughness

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  65. Q65 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Carburettor is commonly used in

    Show answer

    Answer: Spark Ignition (S.I.)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  66. Q66 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The end of the connecting rod is attached to the piston using

    Show answer

    Answer: Wrist pin and Piston pin

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  67. Q67 · Automobile Chassis & Transmission · Steering & Suspension

    __________ is the angle between the vertical axis of the wheels used for steering and the vertical axis of the vehicle when viewed from the front or rear.

    Show answer

    Answer: Camber Angle

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  68. Q68 · Automobile Chassis & Transmission · Wheels & Tyres

    For a Tyre designation- P265/70 R17, 265 stands for

    Show answer

    Answer: Section width

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  69. Q69 · Automobile Chassis & Transmission · Wheels & Tyres

    Tyre provides a cushion between

    Show answer

    Answer: Vehicle and road

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  70. Q70 · Automobile Chassis & Transmission · Wheels & Tyres

    Which of the following is a type of tyre tread designs?

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  71. Q71 · Automobile Chassis & Transmission · Wheels & Tyres

    The carbon black is added to the rubber during tyre construction to

    Show answer

    Answer: Increase strength and Increase Toughness

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  72. Q72 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Incomplete combustion is responsible for

    Show answer

    Answer: Unburned Hydrocarbon

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  73. Q73 · Automotive Electrical & Electronics · Batteries & Charging

    For a Lead acid battery: PbO₂ + Pb + 2H₂SO₄ = _________ + 2H₂O

    Show answer

    Answer: 2PbSO₄

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  74. Q74 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Which of the following is a not a Diesel smoke?

    Show answer

    Answer: Green smoke

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  75. Q75 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Researcher wants to decrease a NOx in SI engine then, Air fuel ratio is

    Show answer

    Answer: < 13:1 and >17:1

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  76. Q76 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Commonly, source of pollutants from a vehicle is

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  77. Q77 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    The inherent oxygen content in gasoline is

    Show answer

    Answer: 0 %

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  78. Q78 · Thermodynamics & Heat Transfer · Thermodynamics

    Match list I with List II and select the correct answer according to it.

    List IList II
    a. Two constant volumes and two adiabaticsP Ericsson
    b. Two constant pressure and two adiabaticsQ Stirling
    c. Two constant volumes and two isothermalsR Joule
    d. Two constant pressures and two isothermalS Otto
    Show answer

    Answer: a-S, b-R, c-Q, d-P

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  79. Q79 · Thermodynamics & Heat Transfer · Thermodynamics

    Thermometer works on

    Show answer

    Answer: Zeroth law of thermodynamics

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  80. Q80 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    For same maximum pressure and output, which of the following sequence of cycle is correct?

    Show answer

    Answer: Diesel cycle, Dual cycle, Otto cycle

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  81. Q81 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following parameter changes during throttling process?

    Show answer

    Answer: Pressure

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  82. Q82 · Thermodynamics & Heat Transfer · Thermodynamics

    1 Kcal = __________

    Show answer

    Answer: 4.184 KJ

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  83. Q83 · Thermodynamics & Heat Transfer · Thermodynamics

    The term N.T.P stands for

    Show answer

    Answer: Normal Temperature and Pressure

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  84. Q84 · Thermodynamics & Heat Transfer · Thermodynamics

    Work is called a __________ and Heat is called a __________

    Show answer

    Answer: Path functions, Path functions

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  85. Q85 · Thermodynamics & Heat Transfer · Thermodynamics

    The equation (p + (a/v²)) (v-b) = R is known as

    Show answer

    Answer: Van der Waal’s equation

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  86. Q86 · Thermodynamics & Heat Transfer · Thermodynamics

    Carnot cycle is a hypothetical cycle in which all cycles are

    Show answer

    Answer: Reversible

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  87. Q87 · Thermodynamics & Heat Transfer · Thermodynamics

    Efficiency of a Carnot engine with T₁ = 200 °C, T₂ = 30 °C is

    Show answer

    Answer: 36 %

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  88. Q88 · Thermodynamics & Heat Transfer · Thermodynamics

    Brayton cycle is used in?

    Show answer

    Answer: Gas turbines

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  89. Q89 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    In a four stroke SI engine --------- is compressed.

    Show answer

    Answer: Air and Fuel

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  90. Q90 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Incomplete combustion is a result of?

    Show answer

    Answer: Cool metal surfaces of the combustion chamber and Imperfect mixture ratio

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  91. Q91 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Cloud point of a fuel is

    Show answer

    Answer: Temperature at which it solidifies

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  92. Q92 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Bad Scavenging gives

    Show answer

    Answer: Low mean indicated pressure

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  93. Q93 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Viscosity of a lubrication oil is

    Show answer

    Answer: decreases with increase in temperature

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  94. Q94 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Which of the following statement is correct for Opposed piston diesel engine?

    Show answer

    Answer: Combustion chamber is located between the pistons

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  95. Q95 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    The delay period in petrol engine is __________ compared to diesel engine

    Show answer

    Answer: Long

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  96. Q96 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The firing order in an inline six-cylinder engine is

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  97. Q97 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Exhaust have 2000 ppm NOx concentration then, NOx in % is

    Show answer

    Answer: 0.2

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  98. Q98 · Engineering Mechanics & Machine Design · Engineering Mechanics

    Which of the following is not the unit of a power?

    Show answer

    Answer: kcal/kg sec

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  99. Q100 · Engineering Mechanics & Machine Design · Machine Design

    Factor of safety is defined as

    Show answer

    Answer: Ultimate stress / Permissible stress

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  100. Q101 · Engineering Mechanics & Machine Design · Strength of Materials

    __________ is the property by virtue of which certain material return back to their original position after the removal of the external force

    Show answer

    Answer: Elasticity

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  101. Q102 · Engineering Mechanics & Machine Design · Strength of Materials

    The dimensions of Young’s modulus of elasticity are given by

    Show answer

    Answer: M¹L⁻¹T⁻²

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  102. Q103 · Engineering Mechanics & Machine Design · Strength of Materials

    Modulus of rigidity is defined as the ratio of

    Show answer

    Answer: Shear stress to shear strain

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  103. Q104 · Engineering Mechanics & Machine Design · Strength of Materials

    The relationship between modulus of elasticity E, bulk modulus K and Poisson’s Ratio μ = is,

    Show answer

    Answer: E = 3K (1 - 2μ)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  104. Q105 · Engineering Mechanics & Machine Design · Strength of Materials

    Two shafts A and B are made of the same material. The diameter of the shaft A is twice as that of shaft B. The power transmitted by the shaft A will be __________ of shaft B.

    Show answer

    Answer: Eight times

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  105. Q106 · Engineering Mechanics & Machine Design · Strength of Materials

    Section modulus Z is expresses as, where, I = Moment of inertia of the cross- section about the neutral axis, Y = Distance from the neutral axis to the extreme fibre

    Show answer

    Answer: I/Y

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  106. Q107 · Engineering Mechanics & Machine Design · Strength of Materials

    The maximum energy that can be stored in a body due to external loading up to the elastic limit is called

    Show answer

    Answer: proof resilience

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  107. Q108 · Materials, Manufacturing & Metrology · Engineering Materials

    The stable form of Pure iron at room temperature is

    Show answer

    Answer: Ferrite

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  108. Q109 · Materials, Manufacturing & Metrology · Engineering Materials

    Case hardening is a technique whereby both __________ and __________ is enhanced for steel alloys

    Show answer

    Answer: Surface hardness, fatigue life

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  109. Q110 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    The path taken by the petrol is

    Show answer

    Answer: Fuel tank- Float Chamber-Jets- Throat

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  110. Q111 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    SAE stands for

    Show answer

    Answer: Society of Automotive Engineers

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  111. Q112 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    Which of the following is a method to determine the friction power of an engine?

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  112. Q113 · IC Engines, Fuels & Emissions · Cooling & Lubrication

    Which of the following is an important function of a lubrication system?

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  113. Q114 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    NOₓ can be control by

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  114. Q115 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Relative fuel air ratio is?

    Show answer

    Answer: Actual F/A to Stoichiometric F/A

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  115. Q116 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    EGR stands for

    Show answer

    Answer: Exhaust Gas Recirculation

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  116. Q117 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Which of the following is a function of detergent engine oil additive?

    Show answer

    Answer: Control of high temperature deposits

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  117. Q118 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    During suction stroke, the in-cylinder pressure is

    Show answer

    Answer: < 1.013 bar

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  118. Q119 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Choke is used to provide

    Show answer

    Answer: Rich mixture during idling condition

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  119. Q120 · Automobile Chassis & Transmission · Steering & Suspension

    Shock absorber is also known as

    Show answer

    Answer: Damper

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  120. Q121 · Automotive Electrical & Electronics · Starting & Ignition

    Which of the following is not a component of primary circuit of a battery ignition system?

    Show answer

    Answer: Ignition cables

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  121. Q123 · IC Engines, Fuels & Emissions · Engine Fundamentals & Cycles

    The brake power of an IC engine having speed 1500 rpm with torque 20 Nm is:

    Show answer

    Answer: 1000 π watts

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  122. Q124 · Automobile Chassis & Transmission · Steering & Suspension

    __________ mean a mechanism that links the wheel directly to the body or to a frame attached to the it.

    Show answer

    Answer: Suspension

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  123. Q125 · Automobile Chassis & Transmission · Clutch & Gearbox

    Transmission system provides:

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  124. Q126 · IC Engines, Fuels & Emissions · Cooling & Lubrication

    In engine __________ requires lubrication

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  125. Q127 · IC Engines, Fuels & Emissions · Cooling & Lubrication

    Methods of Water Cooling is

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  126. Q128 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Which of the following is a component of a Fuel supply system of diesel engine?

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  127. Q129 · Automotive Electrical & Electronics · Lighting, Instruments & Wiring

    A relay can be thought of as a:

    Show answer

    Answer: remote controlled switch

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  128. Q130 · Electric, Hybrid & Alternative-Fuel Vehicles · Alternative Fuels

    In addition to electricity, fuel cells produce -------------------

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  129. Q132 · Automotive Electrical & Electronics · Starting & Ignition

    Cruising conditions require the ignition timing to be:

    Show answer

    Answer: advanced

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  130. Q133 · Automotive Electrical & Electronics · Electronics, Sensors & ECU

    An injector pulse width, in milliseconds, is commonly:

    Show answer

    Answer: 2.0–3.50

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  131. Q134 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Exhaust gas products in case of complete combustion are:

    Show answer

    Answer: carbon dioxide and water

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  132. Q135 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    The type of fuel injection system in which fuel is injected at each intake port

    Show answer

    Answer: multi-point system

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  133. Q136 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    At temperature higher than __________ nitrogen reacts with oxygen and forms NOₓ

    Show answer

    Answer: 1000 ⁰C

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  134. Q137 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    Measurement of exhaust emissions, just after starting the engine from cold, gives a higher than specification reading. The reason for this is:

    Show answer

    Answer: the temperature of the catalyst is low

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  135. Q138 · Automotive Electrical & Electronics · Lighting, Instruments & Wiring

    The instrument which uses pulses from the ignition primary circuit is a:

    Show answer

    Answer: Tachometer

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  136. Q139 · Automotive Electrical & Electronics · Lighting, Instruments & Wiring

    One characteristic of a thermal type fuel gauge is its:

    Show answer

    Answer: slow moving needle

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  137. Q140 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Which of the following is not an essential part of a refrigeration system?

    Show answer

    Answer: Fuel injector

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  138. Q141 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    NMHC stands for

    Show answer

    Answer: Non-methane hydrocarbon

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  139. Q142 · IC Engines, Fuels & Emissions · Fuels, Lubricants & Emissions

    General formula of olefin is

    Show answer

    Answer: CₙH₂ₙ

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  140. Q143 · IC Engines, Fuels & Emissions · Fuel Supply & Combustion

    Increase in jacket water temperature __________ the delay period

    Show answer

    Answer: Decreases

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  141. Q144 · Automobile Chassis & Transmission · Clutch & Gearbox

    __________ are designed to engage and disengage the transmission system as per driver requirement

    Show answer

    Answer: Clutches

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  142. Q145 · Automobile Chassis & Transmission · Clutch & Gearbox

    Clutch friction materials must have

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  143. Q146 · Automobile Chassis & Transmission · Chassis & Body

    Road resistance opposing the motion of the vehicle is

    Show answer

    Answer: All of the given options

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  144. Q147 · Automobile Chassis & Transmission · Clutch & Gearbox

    Ratio span for gear box is

    Show answer

    Answer: Road speed in highest gear / Road speed in lowest gear

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  145. Q148 · Automobile Chassis & Transmission · Wheels & Tyres

    One-side tyre wear is caused by--------------------

    Show answer

    Answer: excessive camber

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  146. Q149 · Automobile Chassis & Transmission · Wheels & Tyres

    For wheel balancing, Centrifugal force is calculated by

    Show answer

    Answer: ((Out of balance mass) * (Linear wheel speed) ^2) / (radius from the axis of rotation)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  147. Q150 · Automobile Chassis & Transmission · Wheels & Tyres

    As per Suspension terminology contact patch is

    Show answer

    Answer: Flattened crown area of a tyre which contacts the ground

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.