APPSC AMVI Automobile Chassis & Transmission previous year questions with answers
Every Automobile Chassis & Transmission question asked in the APPSC AMVI (Assistant Motor Vehicle Inspector) papers on this site, grouped by topic. Answers come from APPSC's final keys; each has a short explanation (free here for a sample, all of them in the practice app).
Practise Automobile Chassis & Transmission onlineChassis & Body
______ is commonly used for making the windscreen of a vehicle.
- Laminated safety glass
- Aluminium
- Wrought iron
- Plastic
Show answer
Answer: (1) Laminated safety glass
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements is correct regarding the materials used in body work of an automobile? I. Steel is still used in majority of the cases being the cheapest along with the case with which it can be stamped out to form various shapes. II. Thermoplastics are quite often used for components like boot coves, grills etc.
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer: (3) Both I and II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Road resistance opposing the motion of the vehicle is
Show answer
Answer: All of the given options
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Clutch & Gearbox
What is the role of the dog clutch in a synchromesh gearbox after synchronization ?
- To initiate the speed matching process
- To provide the final positive engagement between the gear and the shaft
- To disengage the gears during a shift
- To absorb vibrations during operation
Show answer
Answer: (2) To provide the final positive engagement between the gear and the shaft
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the primary function of a torque converter in an automatic transmission ?
- To engage and disengage the engine from the transmission
- To transmit power from the engine to the transmission
- To provide a fluid coupling to transmit torque from the engine to the transmission
- To control the gear selection and shift points
Show answer
Answer: (3) To provide a fluid coupling to transmit torque from the engine to the transmission
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is a basic component of most automatic transmissions ?
- Flywheel
- Planetary gear set
- Friction clutch
- Clutch pedal
Show answer
Answer: (2) Planetary gear set
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which type of clutch does not require a clutch pedal ?
- Single plate
- Multi-plate
- Centrifugal
- Cone
Show answer
Answer: (3) Centrifugal
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In a single plate clutch, what is the function of the pressure plate ?
- To apply friction to the clutch disc
- To disengage the clutch disc from the flywheel when the pedal is depressed
- To hold the clutch disc between the flywheel and itself when the pedal is released
- To absorb heat generated during engagement
Show answer
Answer: (3) To hold the clutch disc between the flywheel and itself when the pedal is released
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Why are multi-plate clutches used instead of single plate clutches ?
- To reduce torque transmission capacity
- To increase the torque transmission capacity
- To operate as a wet clutch only
- To increase the overall size of the clutch
Show answer
Answer: (2) To increase the torque transmission capacity
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Two advantages of using helical gears rather than spur gears in a transmission are
- Strength and cost
- Strength and less end thrust
- Noise level and strength
- Noise level and economy
Show answer
Answer: (3) Noise level and strength
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In case of a multiple disc clutch, if n₁ are the number of discs on the driving shaft and n₂ are the number of the discs on the driven shaft, then the number of pairs of contact surfaces will be
- n₁ + n₂
- n₁ + n₂ − 1
- n₁ + n₂ + 1
- n₁ − n₂ − 1
Show answer
Answer: (2) n₁ + n₂ − 1
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The coefficient of friction for the clutch facing is approximately
- 0.1
- 0.4
- 0.8
- 1.2
Show answer
Answer: (2) 0.4
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The maximum value of axial force at the clutch which a driver can apply while driving without getting fatigued is approximately
- 10N
- 100N
- 500N
- 5000N
Show answer
Answer: (2) 100N
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A single plate clutch has outer and inner diameters as 300 mm and 200 mm, respectively. The total force acting on the friction surface is 6000 N. If the coefficient of friction is 0.2, the power transmitted by the clutch at an angular speed of 300 rad/s is:
- 36 kW
- 90 kW
- 45 kW
- 30 kW
Show answer
Answer: (3) 45 kW
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is NOT a type of clutch?
- Single plate type clutch
- Multiple plate clutch
- Centrifugal type clutch
- Governor type clutch
Show answer
Answer: (4) Governor type clutch
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements about the multi-plate clutch is INCORRECT?
- Multi-plate consists of a number of clutch plates.
- Multi-plate clutch has higher friction surface, which is a multiple of the number of clutch plates.
- The capacity of the multiple clutch to transmit torque however remains same as single plate clutch due to lower pressure between various friction plates.
- Wet multiple clutches are normally smaller in size, and the noise is also much less compared with dry clutches.
Show answer
Answer: (3) The capacity of the multiple clutch to transmit torque however remains same as single plate clutch due to lower pressure between various friction plates.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A type of manual transmission system in which transmission changes occur between gears rotating at the same speed is known as:
- Differential transmission system
- Automatic transmission system
- Synchromesh transmission system
- Reverted gear transmission system
Show answer
Answer: (3) Synchromesh transmission system
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is the primary objective of an automatic transmission system?
- Allow the engine to operate in its narrow range of speeds while providing a wide range of output speeds.
- Allow the engine to operate at constant speeds while providing a wide range of output speeds.
- Allow the engine to operate in its wide range of speeds while providing a narrow range of output speeds.
- Allow the engine to operate in its wide range of speeds while providing a constant output speed.
Show answer
Answer: (1) Allow the engine to operate in its narrow range of speeds while providing a wide range of output speeds.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements is correct for the constant mesh gear box?
- It has the simplest design of gear box.
- It consists of helical gear.
- The size of the gearbox is large.
- It has more chance to damage the gear teeth during meshing.
Show answer
Answer: (2) It consists of helical gear.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is NOT a friction clutch?
- Torque converter
- Centrifugal clutch
- Cone clutch
- Disc clutch
Show answer
Answer: (1) Torque converter
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the best word to describethe assembled parts of a clutch?
- Welded
- Bolted
- Riveted
- Solder
Show answer
Answer: (3) Riveted
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A clutch that consists of thin plates immersed in a bath of oil and has grooved surfaces for permitting the oil to flow through these plates is called:
- Multiple dry clutch
- Multiple wet clutch
- Semi-centrifugal clutch
- Centrifugal clutch
Show answer
Answer: (2) Multiple wet clutch
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
_______ is a type of clutch used in motorcycles.
- Single plate
- Multi-plate
- Diaphragm
- Centrifugal
Show answer
Answer: (2) Multi-plate
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A pilot bearing that is worn or lacks lubricant will produce noise in the clutch when which condition exists?
- Transmission is in gear
- Clutch is disengaged
- Vehicle is standing still
- Clutch is engaged
Show answer
Answer: (2) Clutch is disengaged
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Match the columns.
Parts Name Functions (i)Torque converter (a) Produces pressure (ii) Input shaft (b) Actuate the bands and clutches (iii) Oil pump (c) Produces pressure fluid coupling that connects and disconnects the engine and transmission (iv) Piston and servos (d) Transfers power from torque converter to internal drive member - (i)-c, (ii)-d, (iii)-a, (iv)-b
- (i)-d, (ii)-c, (iii)-b, (iv)-a
- (i)-b, (ii)-c, (iii)-d, (iv)-a
- (i)-b, (ii)-a, (iii)-c, (iv)-d
Show answer
Answer: (1) (i)-c, (ii)-d, (iii)-a, (iv)-b
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
______ allows a clutch to function in a vehicle’s transmission system?
- Magnetic force
- Friction
- Electrical current
- Hydraulic pressure
Show answer
Answer: (2) Friction
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
______ enables the driver to disconnect the drive from the road wheels instantaneously and to engage drive from the engine to the road wheels gradually.
- Gear box
- Spark plug
- Crown wheel
- Clutch
Show answer
Answer: (4) Clutch
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following component in an automobile provides the necessary leverage variation between the engine and road wheels?
- Differential
- Gear box
- Brakes
- Steering wheel
Show answer
Answer: (2) Gear box
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In an automobile, under what condition is the clutch typically disengaged?
- When accelerating
- When idling at a stoplight
- When shifting gears
- Clutch is never disengaged
Show answer
Answer: (3) When shifting gears
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
How should the clutch be engaged to avoid a sudden jerk?
- Keep it disengaged at all times
- Should engage gradually
- Only engage it when coming to a complete stop
- Engage it quickly
Show answer
Answer: (2) Should engage gradually
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Transmission system provides:
Show answer
Answer: All of the given options
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
__________ are designed to engage and disengage the transmission system as per driver requirement
Show answer
Answer: Clutches
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Clutch friction materials must have
Show answer
Answer: All of the given options
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Ratio span for gear box is
Show answer
Answer: Road speed in highest gear / Road speed in lowest gear
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Drive Line, Axles & Differential
What is the purpose of a slip joint in a propeller shaft ?
- To allow the shaft to bend sideways
- To transfer torque at an angle
- To transmit torque when the shafts are not parallel
- To allow the shaft to change length due to expansion or contraction
Show answer
Answer: (4) To allow the shaft to change length due to expansion or contraction
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which type of joint is used to allow the propeller shaft to transmit torque at an angle ?
- Universal joint
- Hinge joint
- Ball and socket joint
- Pivot joint
Show answer
Answer: (1) Universal joint
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A differential allows the rear wheels to rotate at different speeds. This is essential for
- Starting the vehicle on a hill
- Increasing the vehicle's horsepower
- Proper steering during a turn
- Applying the brakes
Show answer
Answer: (3) Proper steering during a turn
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The adjustment for backlash in a differential is provided between
- Crown wheel and sun gear
- Sun gear and planet gear
- Crown wheel and the drive pinion
- Crown wheel and planet gear
Show answer
Answer: (3) Crown wheel and the drive pinion
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Central portion of the propeller shaft is made from
- steel shaft
- gun metal shaft
- steel tube
- cast iron rod
Show answer
Answer: (3) steel tube
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The smallest gears inside the differential casing are
- pinion gears
- sun gears
- side gears
- ring gears
Show answer
Answer: (1) pinion gears
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Two-piece propeller shaft requires
- One universal joint
- A centre support bearing
- The shaft to be solid
- None of the above
Show answer
Answer: (2) A centre support bearing
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements about torque tube drive is INCORRECT?
- The propeller shaft is enclosed by a hollow torque tube.
- Two universal joints are used.
- Load-carrying capability is very low.
- There is no slip joint in torque tube drive.
Show answer
Answer: (2) Two universal joints are used.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
______ connects the transmission main or output shaft of the gear box to the differential of the rear axle.
- Propeller shaft
- Radiator
- Airbags
- Alternator
Show answer
Answer: (1) Propeller shaft
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The ‘Drive shaft’ in a vehicle is also called ______.
- Propeller shaft
- Steering wheel
- Seat belt
- Axle beam
Show answer
Answer: (1) Propeller shaft
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is provided to accommodate changes in the length of the propeller shaft?
- Coupling
- Universal joint
- Slip joint
- Drive belt
Show answer
Answer: (3) Slip joint
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is added in an automobile to provide relative motion to both the rear wheels when the vehicle is turning?
- Radiator
- Differential
- Gear box
- Steering wheel
Show answer
Answer: (2) Differential
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is that principle which is similar to the principle of ‘differential’?
- Spring balance
- Thermometer
- Pressure cooker
- Weighing beam
Show answer
Answer: (4) Weighing beam
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In addition of its primary function, the ‘rear axle’ also serves as what in a vehicle’s chassis?
- A hydraulic pump
- A fuel tank
- A cooling system
- A beam subjected to a bending load
Show answer
Answer: (4) A beam subjected to a bending load
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements is correct regarding the types of rear axle of an automobile? I. Dead axles do not rotate with the wheels but the wheels rotate on it. II. Live axles are those axles which are attached to the wheel so that both of them rotate together.
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer: (3) Both I and II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following types of vehicles typically has a dead rear axle?
- Sports cars
- Horse-drawn vehicles
- Motorcycles
- Electric scooters
Show answer
Answer: (2) Horse-drawn vehicles
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In an automobile system, transmission system is also called ______.
- Differential
- Gear box
- Power train
- Wheel rim
Show answer
Answer: (3) Power train
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What system transmits the power developed by the engine of the automobile to the driving wheels?
- Brake System
- Transmission System
- Steering System
- Ignition System
Show answer
Answer: (2) Transmission System
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the primary function of a Universal Joint in the shaft of an automobile?
- To steer the vehicle
- To connect the engine to the wheels
- To provide power to the lights
- For up and down movements of the rear axle when the vehicle is running
Show answer
Answer: (4) For up and down movements of the rear axle when the vehicle is running
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements is correct regarding the ‘half shafts’ of an automobile? I. It is called half shafts because it normally transmits half of the available power from the differential to the wheel to which it is connected. II. Each half shaft uses a constant velocity joint at both the inboard (differential) and outboard (wheel) end.
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer: (3) Both I and II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Brakes
In a disc brake, which component is responsible for applying pressure to the pads ?
- Brake drum
- Piston in the caliper
- Brake fluid
- Bleed screw
Show answer
Answer: (2) Piston in the caliper
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the main advantage of disc brakes over drum brakes ?
- They are generally less expensive
- They are less prone to brake fade due to better heat dissipation
- They are simpler in design and require less maintenance
- They are more effective when the vehicle is in reverse gear
Show answer
Answer: (2) They are less prone to brake fade due to better heat dissipation
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of these is an advantage of hydraulic brakes over mechanical brakes ?
- They require more pedal effort for the same braking effect
- They require less pedal effort for the same braking effect
- They only provide uniform braking force to one wheel
- They are less effective at high speeds
Show answer
Answer: (2) They require less pedal effort for the same braking effect
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which vehicle type typically uses air brakes due to their size and weight ?
- Passenger cars
- Motorcycles
- Trucks, buses and semi-trailers
- Electric scooters
Show answer
Answer: (3) Trucks, buses and semi-trailers
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In drum type brakes the fluid on releasing return to the master cylinder due to the action of the piston returns spring and
- bypass port
- wheel cylinder spring
- compensating port
- brake shoe retractor spring
Show answer
Answer: (2) wheel cylinder spring
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The hand brake usually operates on
- Rear wheels
- Front wheels
- Right side wheels
- Left side wheels
Show answer
Answer: (1) Rear wheels
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the efficiency of hydraulic braking system ?
- 20% – 30%
- 40% – 50%
- 65% – 75%
- About 90%
Show answer
Answer: (4) About 90%
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
________ is not a part of hydraulic braking system.
- Wheel Cylinder
- Master Cylinder
- Steering Mechanism
- Brake Pedal
Show answer
Answer: (3) Steering Mechanism
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The brake employed in cars are usually operated
- mechanically
- hydraulically
- by means of engine vacuum
- by compressed air
Show answer
Answer: (2) hydraulically
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Fading of brake occurs
- at high speed
- at low speed
- during continuous application
- when brake lining
Show answer
Answer: (3) during continuous application
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The brake bleeding process removes from the system
- Air
- Vacuum
- Excess fluid
- Excess pressure
Show answer
Answer: (1) Air
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements is INCORRECT about mechanical brakes?
- Brakes absorb energy and convert it to heat.
- The capacity of a brake depends largely on the surface area of frictional surfaces but independent of the actuation force applied.
- The durability of a brake or service life between maintenance depends heavily on the type of material used to line the shoe.
- Mechanical brakes all act by generating frictional forces as two surfaces rub against each other.
Show answer
Answer: (2) The capacity of a brake depends largely on the surface area of frictional surfaces but independent of the actuation force applied.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is NOT the main part of your vehicle’s hydraulic brake system?
- Brake pad leaf spring
- Brake line
- Brake disc
- Leaf spring
Show answer
Answer: (4) Leaf spring
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following types of brakes is shown in the figure?
- External expanding brake
- Internal expanding brake
- Centrifugal brake
- Hydraulic brake
Show answer
Answer: (2) Internal expanding brake
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the principle of hydraulic brake system?
- Zeroth law hydraulics
- Newton's law of friction
- Pascal's law pressure
- Fourier's law of conduction
Show answer
Answer: (3) Pascal's law pressure
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A braking system commonly used in heavy commercial vehicles and trucks that requires a heavy braking effort that can be applied by the driver’s leg alone is known as:
- Hydraulic brake system
- Internal expanding brake system
- Band brake system
- Air brake system
Show answer
Answer: (4) Air brake system
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In a master cylinder of a hydraulic brake system, the primary piston is the piston that is:
- near the front end of the car
- directly operated by the brake pedal
- hydraulically operated by the secondary piston
- operated by the return springs
Show answer
Answer: (2) directly operated by the brake pedal
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In a disc brake, which component provides the pad-to-disc adjustment?
- Bleed screw
- Piston
- Caliper
- Piston seal
Show answer
Answer: (4) Piston seal
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following parts will face maximum wear?
- Brake drum
- Friction lining
- Wheel cylinders
- Retracting lever
Show answer
Answer: (2) Friction lining
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Read the given statement and conclusions carefully. Which of the given conclusions logically follow(s) from the statement? Statement: An air brake or, more formally, a compressed-air-brake system, is a type of friction brake for vehicles in which compressed air pressing on a piston is used to apply the pressure to the brake pad to stop the vehicle. Air brakes are used in large heavy vehicles. Conclusions: I) Air brakes are used in cars. II) Air brakes are used in trucks, buses, trailers and semi-trailers.
- Only Conclusion I follows
- Only Conclusion II follows
- Both conclusions follow
- Statement is true, both conclusions are false
Show answer
Answer: (2) Only Conclusion II follows
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the pressure on air brakes?
- 100 to 120 psi
- 80 to 90psi
- 150 to 200 psi
- 32 to 40 psi
Show answer
Answer: (1) 100 to 120 psi
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Match the columns.
Braking Terms Definition (i) Bleeding (a) Vacuum device that multiplies pedal effort (ii) Bluing (b) Discolouring of cast iron rotors due to heat (iii) Brake booster (c) Hydraulic pressure within the brake line (iv) Brake line pressure (d) Process of removing overheated fluid and air - (i)-b, (ii)-d, (iii)-c, (iv)-a
- (i)-c, (ii)-a, (iii)-b, (iv)-d
- (i)-d, (ii)-c, (iii)-b, (iv)-a
- (i)-d, (ii)-b, (iii)-a, (iv)-c
Show answer
Answer: (4) (i)-d, (ii)-b, (iii)-a, (iv)-c
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following options about the given assertion and reason is correct? Assertion (A): Eddy current brakes use the drag force created by eddy currents as a brake to slow or stop moving objects. Reason (R): Mechanical energy is converted into resistive heat energy by the principle of energy conservation.
- Both A and R are correct and R is the correct explanation for A.
- Both A and R are correct but R is not the correct explanation for A.
- A is correct but R is incorrect.
- Both A and R are incorrect.
Show answer
Answer: (1) Both A and R are correct and R is the correct explanation for A.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A vehicle’s brake efficiency is affected by
Show answer
Answer: Both Vehicle weight and braking effort
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Steering & Suspension
When a vehicle turns, the inner front wheel must
- Turn at a smaller angle than the outer wheel
- Turn at the same angle as the outer wheel
- Turn at a greater angle than the outer wheel
- Have a negative steering angle
Show answer
Answer: (3) Turn at a greater angle than the outer wheel
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The condition for correct steering is that all four wheels of a vehicle must
- Turn at the same angle
- Turn about the same instantaneous center
- Have the same turning radius
- Be perfectly aligned at all times
Show answer
Answer: (2) Turn about the same instantaneous center
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the primary function of the Ackermann steering mechanism ?
- To make all four wheels turn at the same angle
- To achieve true rolling by ensuring the wheels turn at different angles when cornering
- To provide power steering assist to the driver
- To improve fuel efficiency
Show answer
Answer: (2) To achieve true rolling by ensuring the wheels turn at different angles when cornering
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The outward or inward tilt of a wheel from the vertical is known as
- Caster
- Toe
- Camber
- Kingpin inclination
Show answer
Answer: (3) Camber
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following steering geometry components is the lateral inward tilt of the steering axis from the vertical ?
- Caster angle
- Camber
- Kingpin inclination
- Toe-in
Show answer
Answer: (3) Kingpin inclination
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A vehicle set with “toe-out” on the front wheels will typically exhibit which handling characteristic ?
- Increased straight-line stability at high speeds
- Slower and smoother steering response
- Enhanced steering sensitivity and quicker turn-in to corners
- Reduced tyre wear over time
Show answer
Answer: (3) Enhanced steering sensitivity and quicker turn-in to corners
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The primary function of a ball and socket joint is to
- Allow rotation in one plane only
- Allow linear motion only
- Allow movement in almost all directions
- Restrict all movements
Show answer
Answer: (3) Allow movement in almost all directions
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The steering ratio for manual steering of cars is approximately
- 5
- 15
- 50
- 100
Show answer
Answer: (2) 15
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The turning circle for a car is approximately
- 1 metre
- 2 metres
- 10 metres
- 30 metres
Show answer
Answer: (3) 10 metres
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A vehicle has a wheelbase (L) of 2 meters and a wheel track (W, distance between front wheel pivots) of 1.5 meters. Calculate the required turning angle for the outer front wheel (ϕ) if the inner front wheel is steered to an angle (θ) of 30 degrees.
- Approximately 25 degrees
- Approximately 22 degrees
- Approximately 20 degrees
- Approximately 28 degrees
Show answer
Answer: (2) Approximately 22 degrees
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Select the option that is true regarding the following two statements labelled Assertion (A) and Reason (R). Assertion (A): Caster angle is concerned with mending the angular proportions between the wheels’ vertical axis and the vertical axis of the car when viewed from the front. Reason (R): This is concerned with maintaining stability and balance while steering the car. The mechanic tends to find the fine balance between positive caster angle and negative caster angle to correct misalignment.
- Both A and R are individually true, and R is the correct explanation of A.
- Both A and R are individually true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: (4) A is false, but R is true.
The tilt of the wheel from the vertical seen from the front of the car is camber, not caster, so A is false. Caster is the forward or backward tilt of the steering (kingpin) axis seen from the side. It provides directional stability and the self-centring of the steering after a turn, and adjusting caster to the correct positive or negative value is part of wheel alignment, which is what R describes.
Select the option that is true regarding the following two statements labelled Assertion (A) and Reason (R). Assertion (A): Toe is the alignment of the tyres in relation to being parallel to each other when viewed from directly above the vehicle. Tyres could face in (toe-in) or outwards (toe-out). Reason (R): Tires are ‘feathered’ when the tread is smooth on one side and sharp on the other. This is usually a sign of poor toe alignment.
- Both A and R are individually true, and R is the correct explanation of A.
- Both A and R are individually true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: (2) Both A and R are individually true, but R is not the correct explanation of A.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following steering mechanisms is shown in the figure?
- Rack and pinion steering linkage
- Relay type steering linkage
- Gearbox steering linage
- Sliding steering linkage
Show answer
Answer: (1) Rack and pinion steering linkage
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following equations represents the basic condition for the steering mechanism for perfect rolling of all wheels? Consider φ = angle of inside lock; θ = angle of outside lock; b and c are the distances between real and front wheels and distance between front wheels, respectively.
- cot φ + cotθ = c/b
- cot φ − cotθ = c/b
- tan φ + tanθ = c/b
- tan φ − cotθ = c/b
Show answer
Answer: (2) cot φ − cotθ = c/b
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The main purpose of a wheel alignment is to:
- control vehicle direction
- stop the vehicle
- reduce tyre wear
- support vehicle weight
Show answer
Answer: (1) control vehicle direction / (3) reduce tyre wear
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following angles consists of the camber angle and steering axis angle?
- Toe-out
- Point of intersection
- Included angle
- Caster angle
Show answer
Answer: (3) Included angle
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is a sign of bad wheel alignment?
- Good cornering effect
- Neutral steer
- The steering wheel returns to the centre
- The vehicle pulls to one side
Show answer
Answer: (4) The vehicle pulls to one side
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Match the columns.
Wheel Alignment terms Functions (i) Castor (a) Measures whether the front of a pair of wheels turns in or out, viewed from the front (ii) Camber (b) Measures the vertical tilt of the wheel (iii) Toe (c) Compares the steering axis to the vertical axis, when the car is viewed from the side (iv) Thrust (d) The imaginary line drawn perpendicular to the rear axles centre line - (i) - c, (ii) - b, (iii) - a, (iv) - d
- (i) - d, (ii) - a, (iii) - b, (iv) - c
- (i) - b, (ii) - c, (iii) - d, (iv) - a
- (i) - c, (ii) - d, (iii) - b, (iv) - a
Show answer
Answer: (1) (i) - c, (ii) - b, (iii) - a, (iv) - d
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What to do if steering becomes hard due to low tyre inflation?
- Increase the engine’s RPM
- Replace the whole steering wheel
- Inflate the tyres to the specified pressure
- Ignore the problem, it will correct itself
Show answer
Answer: (3) Inflate the tyres to the specified pressure
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In an automobile, which system’s primary function is to achieve angular motion of the front wheels to negotiate a turn?
- Steering system
- Brake system
- Ignition system
- Transmission system
Show answer
Answer: (1) Steering system
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
__________ is the angle between the vertical axis of the wheels used for steering and the vertical axis of the vehicle when viewed from the front or rear.
Show answer
Answer: Camber Angle
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Shock absorber is also known as
Show answer
Answer: Damper
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
__________ mean a mechanism that links the wheel directly to the body or to a frame attached to the it.
Show answer
Answer: Suspension
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Wheels & Tyres
Where will an underinflated tyre wear the tread most ?
- Near the center
- Near the edge (both edges)
- In the cross direction
- Evenly across the surface
Show answer
Answer: (2) Near the edge (both edges)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Grooves (tread) are made in the tyres of vehicles to
- Allow the tyre to fit the rim better
- Make the tyre look more appealing
- Improve traction and grip on the road, especially in wet conditions
- Reduce the weight of the tyre
Show answer
Answer: (3) Improve traction and grip on the road, especially in wet conditions
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The disadvantage of radial ply tyre compared to cross ply tyre is
- uncomfortable tried at low speeds
- uncomfortable ride at high speeds
- higher corning power
- lower rolling resistance
Show answer
Answer: (1) uncomfortable tried at low speeds
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statements is INCORRECT about wire wheels?
- This type of wheel can be used for tubed tyres only.
- This type of wheel is used in racing cars only now a days.
- Heat dissipation takes place to the surroundings by means of spokes fitted in the rim.
- Tubeless tyres cannot be fitted over wire wheels.
Show answer
Answer: (2) This type of wheel is used in racing cars only now a days.
Wire (spoke) wheels have a hub joined to the rim by tensioned steel spokes. They are light and let air circulate past the hub and brake drum, aiding cooling, but the spoke nipples pierce the rim, so conventional wire wheels need tubed tyres. They are not confined to racing cars today: they are widely used on motorcycles and bicycles and on some vintage and sports cars, so statement (2) is the incorrect one.
Which of the following symptoms is NOT due to low tyre pressure in a vehicle?
- Increase in rolling resistance
- Increased fuel consumption due to rolling resistance, which makes the engine work harder
- Uneven tread wear - the edges of the tyre wear out faster
- Smaller contact area with the road
Show answer
Answer: (4) Smaller contact area with the road
An under-inflated tyre flexes more and flattens out, so its contact patch with the road becomes larger, not smaller. The extra flexing raises rolling resistance and heat build-up, which increases fuel consumption, and the load is carried on the shoulders, so both edges of the tread wear faster than the centre. A smaller contact patch with centre wear is a symptom of over-inflation.
Where is the tyre-tube assembly mounted in a vehicle?
- Over the wheel rim
- On the rear axle
- On the gear box
- On the differential
Show answer
Answer: (1) Over the wheel rim
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
______ is the final contact point between the road and the vehicle.
- Gear box
- Tyres
- Wheel hubs
- Differential
Show answer
Answer: (2) Tyres
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In an automobile, what is the ‘tread’?
- The engine compartment
- The steering wheel
- Automobile’s dashboard
- The outer portion of the tyre that makes contact with the road surface
Show answer
Answer: (4) The outer portion of the tyre that makes contact with the road surface
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What are the rings that fit on the rim of the wheel and connect the tyre to the rim called?
- Beads
- Hubs
- Valves
- Axles
Show answer
Answer: (1) Beads
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What function does ‘Sulphur’ perform in relation to tyre material in the production of rubber?
- Speed enhancer
- Vulcanizing agent
- Helps in better gripping on the road
- Helps in better turning on the road
Show answer
Answer: (2) Vulcanizing agent
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
For a Tyre designation- P265/70 R17, 265 stands for
Show answer
Answer: Section width
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Tyre provides a cushion between
Show answer
Answer: Vehicle and road
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is a type of tyre tread designs?
Show answer
Answer: All of the given options
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The carbon black is added to the rubber during tyre construction to
Show answer
Answer: Increase strength and Increase Toughness
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
One-side tyre wear is caused by--------------------
Show answer
Answer: excessive camber
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
For wheel balancing, Centrifugal force is calculated by
Show answer
Answer: ((Out of balance mass) * (Linear wheel speed) ^2) / (radius from the axis of rotation)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
As per Suspension terminology contact patch is
Show answer
Answer: Flattened crown area of a tyre which contacts the ground
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.