Learn with Anil · APPSC AMVI (Assistant Motor Vehicle Inspector) PYQsPractise online →Subscribe ₹149

APPSC AMVI Thermodynamics & Heat Transfer previous year questions with answers

Every Thermodynamics & Heat Transfer question asked in the APPSC AMVI (Assistant Motor Vehicle Inspector) papers on this site, grouped by topic. Answers come from APPSC's final keys; each has a short explanation (free here for a sample, all of them in the practice app).

Practise Thermodynamics & Heat Transfer online

Thermodynamics

  1. AMVI 2026 Paper 2 (Automobile) · Q1 · Thermodynamics & Heat Transfer · Thermodynamics

    A system is in thermodynamic equilibrium when

    1. It exchanges mass but not energy with its surroundings
    2. It exchanges both mass and energy with its surroundings
    3. Macroscopic variables like pressure, volume and temperature do not change with time
    4. It exchanges energy but not mass with its surroundings
    Show answer

    Answer: (3) Macroscopic variables like pressure, volume and temperature do not change with time

    A system is in thermodynamic equilibrium when it is at the same time in thermal, mechanical and chemical equilibrium, so its macroscopic properties such as pressure, volume and temperature are uniform and do not change with time, with no net internal flows. Whether a system exchanges mass, energy or both with its surroundings only tells us whether it is open or closed; it does not decide whether the system is in equilibrium.

  2. AMVI 2026 Paper 2 (Automobile) · Q2 · Thermodynamics & Heat Transfer · Thermodynamics

    The Zeroth Law of Thermodynamics states that if two systems are each in thermal equilibrium with a third system, then

    1. They are in mechanical equilibrium
    2. They are in chemical equilibrium
    3. They are in thermal equilibrium with each other
    4. They are in a state of total thermodynamic equilibrium
    Show answer

    Answer: (3) They are in thermal equilibrium with each other

    The Zeroth Law says that if bodies A and B are each in thermal equilibrium with a third body C, then A and B are in thermal equilibrium with each other: there is no net heat flow when they are brought into contact, because they are at the same temperature. It is the basis of temperature measurement, the third body being the thermometer. It says nothing about mechanical or chemical equilibrium.

  3. AMVI 2026 Paper 2 (Automobile) · Q3 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following is not an example of a pure substance ?

    1. Water (H₂O)
    2. Nitrogen (N₂)
    3. Air (a mixture of gases like O₂, N₂, Ar)
    4. Helium (He)
    Show answer

    Answer: (3) Air (a mixture of gases like O₂, N₂, Ar)

    A pure substance has a fixed and uniform chemical composition throughout. Water, nitrogen and helium are single chemical species and qualify. Air is a mixture of nitrogen, oxygen, argon and other gases. It behaves like a pure substance only while it remains a gas of uniform composition; when it is partly liquefied, its components condense at different temperatures and the liquid and vapour have different compositions, so air is not a true pure substance.

  4. AMVI 2026 Paper 2 (Automobile) · Q4 · Thermodynamics & Heat Transfer · Thermodynamics

    The Mollier diagram is a plot of

    1. Temperature and entropy
    2. Temperature and enthalpy
    3. Pressure and enthalpy
    4. Enthalpy and entropy
    Show answer

    Answer: (4) Enthalpy and entropy

    The Mollier diagram, devised by Richard Mollier, plots enthalpy (h) on the vertical axis against entropy (s) on the horizontal axis, usually for steam. On this h–s chart an isentropic expansion is a vertical line and the enthalpy drop can be read directly, which makes it convenient for nozzle and turbine calculations. The temperature–entropy plot is the T–s diagram, and the pressure–enthalpy (p–h) chart is mainly used for refrigerants.

  5. AMVI 2026 Paper 2 (Automobile) · Q20 · Thermodynamics & Heat Transfer · Thermodynamics

    A device used for measuring heat exchange is called a

    1. Thermometer
    2. Joule meter
    3. Calorimeter
    4. Pressure gauge
    Show answer

    Answer: (3) Calorimeter

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  6. AMVI 2026 Paper 2 (Automobile) · Q81 · Thermodynamics & Heat Transfer · Thermodynamics

    What is the highest possible theoretical efficiency of a heat engine operating with a hot reservoir of furnace gases at 2100 °C when the cooling water available is at 15 °C ?

    1. 0.678 or 67.8%
    2. 0.778 or 77.8%
    3. 0.878 or 87.8%
    4. 0.978 or 97.8%
    Show answer

    Answer: (3) 0.878 or 87.8%

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  7. AMVI 2026 Paper 2 (Automobile) · Q82 · Thermodynamics & Heat Transfer · Thermodynamics

    The specific volume of water when heated at 0 °C

    1. First increases and then decreases
    2. First decreases and then increases
    3. Increases steadily
    4. Decreases steadily
    Show answer

    Answer: (2) First decreases and then increases

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  8. AMVI 2026 Paper 2 (Automobile) · Q83 · Thermodynamics & Heat Transfer · Thermodynamics

    What is the value of absolute zero scale of temperature ?

    1. 273 °C
    2. 273 °K
    3. − 273 °K
    4. 0° K
    Show answer

    Answer: (4) 0° K

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  9. AMVI 2023 Paper 2 (Automobile) · Q13 · Thermodynamics & Heat Transfer · Thermodynamics

    Match the following thermodynamic systems with their properties.

    List IList II
    (A) Open system(i) The system which can exchange only energy but not mass with surroundings
    (B) Closed system(ii) The system in which neither energy nor matter can be exchanged with surroundings
    (C) Isolated system(iii) The system which can exchange both matter and energy with surroundings
    1. (A)-(i), (B)-(ii) and (C)-(iii)
    2. (A)-(iii), (B)-(ii) and (C)-(i)
    3. (A)-(iii), (B)-(i) and (C)-(ii)
    4. (A)-(ii), (B)-(i) and (C)-(iii)
    Show answer

    Answer: (3) (A)-(iii), (B)-(i) and (C)-(ii)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  10. AMVI 2023 Paper 2 (Automobile) · Q14 · Thermodynamics & Heat Transfer · Thermodynamics

    Read the given statement and conclusions carefully and select the correct option. Statement (A): If there is no tendency to change the microscopic properties or inner properties of the system even when the system is isolated from surroundings, then it is considered the thermodynamic equilibrium. Conclusion: I. When any unbalanced force is absent in the system, then it is called chemical equilibrium. II. Thermal equilibrium means there is no change of any property of the system. III. If a system can undergo a chemical reaction, then it is called a chemically equilibrium system.

    1. Statement A is correct, but conclusions I, II and III are not true explanations of A.
    2. Statement A and conclusions I, II and III are individually true.
    3. Only statement A and conclusion II are true.
    4. Statement A is correct, and conclusions I, II and III are true explanations of A.
    Show answer

    Answer: (3) Only statement A and conclusion II are true.

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  11. AMVI 2023 Paper 2 (Automobile) · Q15 · Thermodynamics & Heat Transfer · Thermodynamics

    Select the option that is true regarding the following two statements labelled Assertion (A) and Reason (R). Assertion (A): Zeroth Law of Thermodynamics states that when two bodies are in thermal equilibrium with another third body, then the two bodies are also in thermal equilibrium with each other. Reason (R): If we take three bodies A, B and C, then if A and B are in thermal equilibrium and B and C are in thermal equilibrium separately, then A and C are also considered to be in thermal equilibrium.

    1. Both A and R are individually true, and R is the correct explanation of A.
    2. Both A and R are individually true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: (1) Both A and R are individually true, and R is the correct explanation of A.

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  12. AMVI 2023 Paper 2 (Automobile) · Q16 · Thermodynamics & Heat Transfer · Thermodynamics

    Match the following laws with their correct explanation.

    List IList II
    A) First law of thermodynamic system(i) It says that heat always moves from hotter objects to colder ones.
    (B) Second law of thermodynamic system(ii) It states that at absolute zero temperature of a system, the entropy becomes constant.
    (C) Zeroth law of thermodynamic system(iii) It states that energy cannot be created or destroyed, only converted from one form to another.
    (D) Third law of thermodynamic system(iv) If two systems are in thermal equilibrium with a third system, they must be in thermal equilibrium with each other.
    1. (A)-(i), (B)-(ii), (C)-(iii) and (D)-(iv)
    2. (A)-(iii), (B)-(i), (C)-(iv) and (D)-(ii)
    3. (A)-(ii), (B)-(iii), (C)-(i) and (D)-(iv)
    4. (A)-(iv), (B)-(iii), (C)-(ii) and (D)-(i)
    Show answer

    Answer: (2) (A)-(iii), (B)-(i), (C)-(iv) and (D)-(ii)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  13. AMVI 2023 Paper 2 (Automobile) · Q17 · Thermodynamics & Heat Transfer · Thermodynamics

    Read the given statement and conclusions carefully and select the correct option. Statement (A): The Mollier diagram is a tool used by engineers to predict, theoretically, the performance of systems and installations. Conclusions: I. The Mollier diagram is also called the enthalpy (h)–entropy (s) chart. II. Typically, the Mollier chart covers pressure in the range of 1.0 to 10 bar and up to 100°C temperature and plotted for only water.

    1. Statement A is correct, and conclusions I and II are not correct explanations of A.
    2. Statement A is correct, and conclusions I and II are correct explanations of A.
    3. Statement A is correct, and conclusion I is the only correct explanation of A.
    4. Statement A correct, and conclusion II is the only correct explanation of A.
    Show answer

    Answer: (3) Statement A is correct, and conclusion I is the only correct explanation of A.

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  14. AMVI 2023 Paper 2 (Automobile) · Q18 · Thermodynamics & Heat Transfer · Thermodynamics

    Select the option that is true regarding the following two statements labelled Assertion (A) and Reason (R). Assertion (A): The performance of a simple Rankine cycle is not sensitive to the efficiency of the feed pump. Reason (R): The network ratio is practically unit for a Rankine cycle.

    1. Both A and R are individually true, but R is not the correct explanation of A.
    2. A is true, but R is not the correct explanation of A.
    3. A is false, but R is the correct explanation of A.
    4. Both A and R are individually true, and R is the correct explanation of A.
    Show answer

    Answer: (4) Both A and R are individually true, and R is the correct explanation of A.

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  15. AMVI 2023 Paper 2 (Automobile) · Q64 · Thermodynamics & Heat Transfer · Thermodynamics

    Which gas CANNOTbe used in a sterling engine?

    1. Air
    2. Hydrogen
    3. Helium
    4. Neon
    Show answer

    Answer: (4) Neon

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  16. AMVI 2023 Paper 2 (Automobile) · Q70 · Thermodynamics & Heat Transfer · Thermodynamics

    During the throttling process ________ does not change.

    1. pressure
    2. internal energy
    3. entropy
    4. enthalpy
    Show answer

    Answer: (4) enthalpy

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  17. AMVI 2019 Paper 2 (Automobile) · Q1 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following is true for open system?

    Show answer

    Answer: Mass can transfer, energy can transfer

    An open system (control volume) is one whose boundary allows both mass and energy (heat and work) to cross, for example an engine cylinder during intake and exhaust, a compressor, a turbine or a nozzle. A closed system allows only energy transfer with a fixed mass (a piston-cylinder with the valves shut), and an isolated system allows neither mass nor energy to cross its boundary.

  18. AMVI 2019 Paper 2 (Automobile) · Q2 · Thermodynamics & Heat Transfer · Thermodynamics

    A piston cylinder contains air at 600 kPa, 290 K and a volume of 0.01m^3. A constant pressure process gives 60 kJ of work out. Find the final volume of the air.

    Show answer

    Answer: 0.11 m^3

    In a constant-pressure process the boundary work is W = p(V₂ − V₁). So 60 kJ = 600 kPa × (V₂ − 0.01) m³, giving V₂ − 0.01 = 60/600 = 0.1 m³ and V₂ = 0.11 m³. The temperature (290 K) is not needed for the volume; it would be used to find the mass of air, m = pV/RT = 600 × 0.01/(0.287 × 290) ≈ 0.072 kg.

  19. AMVI 2019 Paper 2 (Automobile) · Q3 · Thermodynamics & Heat Transfer · Thermodynamics

    As per kinetic theory of gases, value of gamma for monoatomic gases, diatomic gases and polyatomic gases are

    Show answer

    Answer: 5/3, 7/5, 4/3

    Kinetic theory gives γ = cp/cv = 1 + 2/f, where f is the number of degrees of freedom of the molecule. A monatomic gas (He, Ar) has 3 translational degrees, so γ = 5/3 ≈ 1.67; a diatomic gas (O₂, N₂, air) has 5 (3 translational + 2 rotational), so γ = 7/5 = 1.4; a non-linear polyatomic gas has 6, so γ = 8/6 = 4/3 ≈ 1.33 (vibrational modes neglected).

  20. AMVI 2019 Paper 2 (Automobile) · Q5 · Thermodynamics & Heat Transfer · Thermodynamics

    The ratio of specific heat at constant volume (cv) and specific heat at constant pressure (cp) is

    Show answer

    Answer: < 1

    cp − cv = R, so cp is always larger than cv: at constant pressure part of the heat supplied does expansion work, while at constant volume all of it raises the internal energy. Hence cp/cv = γ > 1 (1.4 for air), and the ratio asked, cv/cp = 1/γ, is less than 1 (about 0.714 for air).

  21. AMVI 2019 Paper 2 (Automobile) · Q9 · Thermodynamics & Heat Transfer · Thermodynamics

    Availability of a system is depending on the

    Show answer

    Answer: State of a system and surrounding

    Availability (exergy) is the maximum useful work obtainable as a system is brought into equilibrium with its surroundings (the dead state). It therefore depends both on the state of the system (p, T, composition) and on the state of the surroundings (p₀, T₀); for a closed system, availability = (U − U₀) + p₀(V − V₀) − T₀(S − S₀). A system already at the dead state has zero availability.

  22. AMVI 2019 Paper 2 (Automobile) · Q10 · Thermodynamics & Heat Transfer · Thermodynamics

    Calculate the enthalpy of 25 kg of fluid that occupies a volume of 12000 litre, if the internal energy is 28000000 J /kg and the pressure is 0.3 MN/m²

    Show answer

    Answer: 703.6 MJ

    Enthalpy H = U + pV. The internal energy U = 25 kg × 28,000,000 J/kg = 700 MJ. The volume is 12,000 litres = 12 m³, so pV = 0.3 × 10⁶ N/m² × 12 m³ = 3.6 MJ. Therefore H = 700 + 3.6 = 703.6 MJ, and the specific enthalpy is 703.6/25 = 28.144 MJ/kg.

  23. AMVI 2019 Paper 2 (Automobile) · Q39 · Thermodynamics & Heat Transfer · Thermodynamics

    __________is known as entropy principle

    Show answer

    Answer: Second law of thermodynamics

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  24. AMVI 2019 Paper 2 (Automobile) · Q48 · Thermodynamics & Heat Transfer · Thermodynamics

    An Isobaric process is a

    Show answer

    Answer: Constant pressure process

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  25. AMVI 2019 Paper 2 (Automobile) · Q53 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following property is dependent on a mass of a thermodynamic system?

    Show answer

    Answer: Volume

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  26. AMVI 2019 Paper 2 (Automobile) · Q54 · Thermodynamics & Heat Transfer · Thermodynamics

    Law: “The change of internal energy of a perfect gas is directly proportional to the change of temperature” is known as

    Show answer

    Answer: Joule’s law

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  27. AMVI 2019 Paper 2 (Automobile) · Q55 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following is the correct expression to corelate gas constant (R) and constant volume specific heat (CV)?

    Show answer

    Answer: γ = 1 + R/CV

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  28. AMVI 2019 Paper 2 (Automobile) · Q56 · Thermodynamics & Heat Transfer · Thermodynamics

    Efficiency of a cycle is considered as

    Show answer

    Answer: Workdone / Heat Supplied

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  29. AMVI 2019 Paper 2 (Automobile) · Q78 · Thermodynamics & Heat Transfer · Thermodynamics

    Match list I with List II and select the correct answer according to it.

    List IList II
    a. Two constant volumes and two adiabaticsP Ericsson
    b. Two constant pressure and two adiabaticsQ Stirling
    c. Two constant volumes and two isothermalsR Joule
    d. Two constant pressures and two isothermalS Otto
    Show answer

    Answer: a-S, b-R, c-Q, d-P

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  30. AMVI 2019 Paper 2 (Automobile) · Q79 · Thermodynamics & Heat Transfer · Thermodynamics

    Thermometer works on

    Show answer

    Answer: Zeroth law of thermodynamics

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  31. AMVI 2019 Paper 2 (Automobile) · Q81 · Thermodynamics & Heat Transfer · Thermodynamics

    Which of the following parameter changes during throttling process?

    Show answer

    Answer: Pressure

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  32. AMVI 2019 Paper 2 (Automobile) · Q82 · Thermodynamics & Heat Transfer · Thermodynamics

    1 Kcal = __________

    Show answer

    Answer: 4.184 KJ

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  33. AMVI 2019 Paper 2 (Automobile) · Q83 · Thermodynamics & Heat Transfer · Thermodynamics

    The term N.T.P stands for

    Show answer

    Answer: Normal Temperature and Pressure

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  34. AMVI 2019 Paper 2 (Automobile) · Q84 · Thermodynamics & Heat Transfer · Thermodynamics

    Work is called a __________ and Heat is called a __________

    Show answer

    Answer: Path functions, Path functions

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  35. AMVI 2019 Paper 2 (Automobile) · Q85 · Thermodynamics & Heat Transfer · Thermodynamics

    The equation (p + (a/v²)) (v-b) = R is known as

    Show answer

    Answer: Van der Waal’s equation

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  36. AMVI 2019 Paper 2 (Automobile) · Q86 · Thermodynamics & Heat Transfer · Thermodynamics

    Carnot cycle is a hypothetical cycle in which all cycles are

    Show answer

    Answer: Reversible

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  37. AMVI 2019 Paper 2 (Automobile) · Q87 · Thermodynamics & Heat Transfer · Thermodynamics

    Efficiency of a Carnot engine with T₁ = 200 °C, T₂ = 30 °C is

    Show answer

    Answer: 36 %

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  38. AMVI 2019 Paper 2 (Automobile) · Q88 · Thermodynamics & Heat Transfer · Thermodynamics

    Brayton cycle is used in?

    Show answer

    Answer: Gas turbines

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

Refrigeration & Air Conditioning

  1. AMVI 2026 Paper 2 (Automobile) · Q67 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    What is the function of the condenser in an automotive air-conditioning system ?

    1. It cools the refrigerant
    2. It compresses the refrigerant
    3. It expands the refrigerant
    4. It removes moisture from the refrigerant
    Show answer

    Answer: (1) It cools the refrigerant

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  2. AMVI 2026 Paper 2 (Automobile) · Q68 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    What is the purpose of the recirculating mode in a car’s air-conditioning ?

    1. To pull in outside air
    2. To increase the use of the AC system
    3. To recycle air already inside the cabin
    4. To turn the AC system off
    Show answer

    Answer: (3) To recycle air already inside the cabin

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  3. AMVI 2026 Paper 2 (Automobile) · Q149 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Which of the following is a possible reason for flushing an A/C condenser ?

    1. To replace the old refrigerant with new refrigerant
    2. To remove sludge and debris
    3. To remove moisture
    4. To improve cooling efficiency
    Show answer

    Answer: (2) To remove sludge and debris

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  4. AMVI 2023 Paper 2 (Automobile) · Q1 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Which of the following is NOT a part of the air conditioning system used in cars?

    1. Compressor
    2. Refrigerant
    3. Turbo charger
    4. Condenser
    Show answer

    Answer: (3) Turbo charger

    A car air-conditioning system is a vapour-compression refrigeration circuit: the compressor (belt- or motor-driven), condenser, receiver-drier, expansion valve or orifice tube and evaporator, with a refrigerant such as R-134a or R-1234yf circulating through them. A turbocharger is an exhaust-driven turbine and compressor that boosts intake air pressure to raise engine power; it is part of the air-induction system, not the air conditioner.

  5. AMVI 2023 Paper 2 (Automobile) · Q2 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Select the option that is true regarding the following two statements labelled Assertion (A) and Reason (R). Assertion (A): The COP of an air-conditioning plant is lower than that of an ice plant. Reason (R): The temperatures required in the ice plant are lower than those required for an air-conditioning plant.

    1. Both A and R are individually true, and R is the correct explanation of A.
    2. Both A and R are individually true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: (4) A is false, but R is true.

    COP falls as the evaporator temperature falls, because the compressor has to lift heat through a larger temperature difference (Carnot COP = T_L/(T_H − T_L)). An ice plant evaporates below 0 °C, while an air-conditioning plant evaporates at about 5–10 °C, so R is true. For example, with a 45 °C condenser the Carnot COP is about 7.0 at 5 °C but only 4.3 at −15 °C. Hence an air-conditioning plant has the higher COP and A is false.

  6. AMVI 2023 Paper 2 (Automobile) · Q62 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Identify the odd one in terms of components of a car air conditioner.

    1. Compressor
    2. Condenser
    3. Evaporator
    4. Rectifier
    Show answer

    Answer: (4) Rectifier

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  7. AMVI 2023 Paper 2 (Automobile) · Q63 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Match the columns.

    RefrigerationApplications
    (i) Domestic refrigeration(a) Holding and displaying frozen and fresh food in retail outlets
    (ii) Commercial refrigeration(b) Appliances used for keeping food in dwelling units
    (iii) Industrial refrigeration(c)Large equipment, typically 25 Kw to 30 MW
    (iv) Transport refrigeration(d) Used during transportation by road, rail, air and sea
    1. (i)-b, (ii)-c, (iii)-a, (iv)-d
    2. (i)-c, (ii)-b, (iii)-a, (iv)-d
    3. (i)-d, (ii)-b, (iii)-a, (iv)-c
    4. (i)-b, (ii)-a, (iii)-c, (iv)-d
    Show answer

    Answer: (4) (i)-b, (ii)-a, (iii)-c, (iv)-d

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  8. AMVI 2019 Paper 2 (Automobile) · Q140 · Thermodynamics & Heat Transfer · Refrigeration & Air Conditioning

    Which of the following is not an essential part of a refrigeration system?

    Show answer

    Answer: Fuel injector

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.