TGPSC HMWSSB Manager Network Theory previous year questions with answers
Every Network Theory question asked in the TGPSC HMWSSB Manager (Engineering) papers on this site, grouped by topic. Answers come from TSPSC's final key; each has a short explanation (free here for a sample, all of them in the practice app).
Practise Network Theory onlineNetwork Laws & Theorems
The voltage across 5 A source in the given circuit is
- 17.5 volt
- 25 volt
- 15 volt
- 20 volt
Show answer
Answer: (1) 17.5 volt
Take the bottom wire as reference and let V be the top-right node (the node shared by the shunt 5 Ω and the 5 A source). KCL at that node: (V − 10)/5 + V/5 = 5 → 2V − 10 = 25 → V = 17.5 V, which is the voltage across the 5 A source.
An ideal voltage source and current sources are connected in parallel. This circuit has
- neither Thevenin nor Norton's equivalent
- both Thevinin and Norton's equivalent
- a Thevenin equivalent but not Norton's equivalent
- a Norton's equivalent but not Thevenin equivalent
Show answer
Answer: (3) a Thevenin equivalent but not Norton's equivalent
An ideal voltage source fixes the terminal voltage whatever current sources are in parallel with it, so the combination is just that voltage source: a Thevenin equivalent with V_th = V and R_th = 0. A Norton equivalent would need I_N = V_th/R_th = V/0, which is infinite, so it does not exist.
KCL is a consequences of law of conservation of
- flux
- energy
- potential
- charge
Show answer
Answer: (4) charge
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
When a source is delivering maximum power to a load, the efficiency of the circuit
- is always 50%
- is always 75%
- depends on the circuit parameters
- is always 100%
Show answer
Answer: (1) is always 50%
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In the Thevenin equivalent circuit, V_th equals
- short-circuit terminal voltage
- open-circuit terminal voltage
- net voltage available in the circuit
- voltage of the source
Show answer
Answer: (2) open-circuit terminal voltage
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
If b is the number of branches and n the number of nodes in a connected graph, the number of links corresponding to any tree of the graph
- b − n − 1
- b − n + 1
- n − b − 1
- n + 1 − b
Show answer
Answer: (2) b − n + 1
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Superposition theorem is not applicable to networks containing
- nonlinear elements
- dependent voltage sources
- dependent current sources
- transformers
Show answer
Answer: (1) nonlinear elements
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
AC Circuits & Resonance
A capacitor C is connected across a coil with resistance R and inductance L. The effective [impedance] of the circuit at resonance is
- 1/(RLC)
- RC/L
- L/(RC)
- L/√(RC)
Show answer
Answer: (3) L/(RC)
For a coil (R in series with L) in parallel with C, the admittance at resonance is purely real: Y = R/(R² + ω₀²L²), and the resonance condition gives R² + ω₀²L² = L/C. So the effective (dynamic) impedance is Z = 1/Y = (L/C)/R = L/(RC), a pure resistance that is large when R is small. (The booklet leaves out the word "impedance"; it is added in square brackets.)
The current i(t) through a 10Ω resistor in series with an inductance is given by i(t) = 3 + 4 sin(100t + 45°) + 4sin(300t + 60°) Amperes. The rms value of the current and the power dissipated in the circuit are
- 40 A, 410W
- 10A, 350W
- 5A, 250W
- 11A, 250W
Show answer
Answer: (3) 5A, 250W
For a sum of a dc term and sinusoids of different frequencies, I_rms = √(I_dc² + I₁²/2 + I₂²/2) = √(9 + 8 + 8) = √25 = 5 A. Only the resistor dissipates power (the inductance stores energy), so P = I_rms²R = 25 × 10 = 250 W.
For a series RLC circuit, the power factor at the lowest half power frequency is
- 0.707 lagging
- 0.5 leading
- 1.0
- 0.707 leading
Show answer
Answer: (4) 0.707 leading
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A series RLC circuit has a resonance frequency of 1 kHz and a quality factor Q = 100. If each of R, L and C is doubled from its original value, the new Q of the circuit
- 200
- 100
- 25
- 50
Show answer
Answer: (4) 50
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In an RLC parallel circuit the impedance at resonance is
- ∞
- minimum
- maximum
- zero
Show answer
Answer: (3) maximum
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Transients & Laplace Analysis
A transient current in a network is i(t) = 2e⁻ᵗ − e⁻⁵ᵗ, t ≥ 0. The pole-zero configuration of I(s) is
- poles : 1,5 zeros : 9
- poles : −1, −5 zeros : −9
- poles : 2, −1 zeros : −1, −5
- poles : 2, −1 zeros: 1, 5
Show answer
Answer: (2) poles : −1, −5 zeros : −9
I(s) = 2/(s + 1) − 1/(s + 5) = (2s + 10 − s − 1)/((s + 1)(s + 5)) = (s + 9)/((s + 1)(s + 5)). So the poles are at s = −1 and −5 and the zero is at s = −9.
The transfer function of a system Z(s) = V(s)/I(s)= s/(s+3). The system is at rest for t < 0. What will be the value of v(t) for t ≥ 0, if i(t) = 3 u(t), where u(t) is a step function
- e⁻ᵗ
- 4 e⁻ᵗ
- 2 e⁻³ᵗ
- 3e⁻³ᵗ
Show answer
Answer: (4) 3e⁻³ᵗ
I(s) = 3/s, so V(s) = Z(s)I(s) = (s/(s + 3)) × (3/s) = 3/(s + 3). Taking the inverse Laplace transform, v(t) = 3e⁻³ᵗ for t ≥ 0.
An inductance and a capacitance are connected in series. If a unit step voltage is applied across the combination, then the initial and final currents in the circuit will be
- 0, ∞ respectively
- 0, 0 respectively
- ∞, ∞ respectively
- ∞, 0 respectively
Show answer
Answer: (2) 0, 0 respectively
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The Laplace transform of the function i(t) is I(s) = (10s + 4)/(s(s+1)(s² + 4s + 5)). Its final value will be
- 5/4
- 4/5
- 5
- 4
Show answer
Answer: (2) 4/5
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Two-Port Networks & Network Synthesis
F(s) = (s+1)(s+3)/(s(s+2)) represents an
- RC impedance and an RL admittance
- RL admittance
- RC impedance
- RC admittance
Show answer
Answer: (1) RC impedance and an RL admittance
The poles (0, −2) and zeros (−1, −3) are simple, lie on the negative real axis and alternate, with a pole nearest the origin, and F(0) = ∞ > F(∞) = 1: these are the properties of an RC driving-point impedance, which are exactly those of an RL driving-point admittance. Expanding, F(s) = 1 + 1.5/s + 0.5/(s + 2): as an impedance this is 1 Ω in series with a 2/3 F capacitor and a parallel 2 F, 0.25 Ω section; as an admittance it is 1 S in parallel with a 2/3 H inductor and a branch of 2 H in series with 4 Ω. So it represents both.
The network function F(s) = (s+2)/((s+1)(s+3)) Represents an
- RC admittance and an RL impedance
- RC impedance
- RL impedance
- RC impedance and an RL admittance
Show answer
Answer: (4) RC impedance and an RL admittance
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
If a two-port network is reciprocal as well as symmetrical, which one of the following conditions true
- Z_12 = Z_21 and Z_11 = Z_22
- Z_11 = Z_21 and Z_12 = Z_22
- Y_11 = Y_21 and Y_12 = Y_22
- AD + BC = 1 and A = C
Show answer
Answer: (1) Z_12 = Z_21 and Z_11 = Z_22
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Any two-port network having a 6dB loss will give
- an output power which is 0.707 of the input power
- an output power which is one quarter of the input power
- an output power which is one half of the input power
- an output voltage which is 0.707 of the input voltage
Show answer
Answer: (2) an output power which is one quarter of the input power
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
For a reciprocal network, the two port h- parameters are related as follows
- h_12 = h_21
- h_11h_22 − h_21h_12 = 1
- h_11h_22 − h_21h_12 = −1
- h_12 = − h_21
Show answer
Answer: (4) h_12 = − h_21
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.