Learn with Anil · JKSSB JE Civil PYQsPractise online →Subscribe ₹149

JKSSB JE Civil Soil Mechanics & Foundations previous year questions with answers

Every Soil Mechanics & Foundations question asked in the JKSSB JE Civil papers on this site, grouped by topic. Answers come from JKSSB's key; each has a short explanation (free here for a sample, all of them in the practice app).

Practise Soil Mechanics & Foundations online

Soil Mechanics & Foundations

  1. JE Civil 2025 · 2 November · Q61 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The void ratio of a fully saturated soil sample having a porosity of 0.3 is

    1. 0.26
    2. 0.66
    3. 0.43
    4. 1.0
    Show answer

    Answer: (3) 0.43

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  2. JE Civil 2025 · 2 November · Q62 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The soil has a bulk density of 55 kN/m³ and water content 10%. The dry density of soil is

    1. 5.5 kN/m³
    2. 10 kN/m³
    3. 50 kN/m³
    4. 55 kN/m³
    Show answer

    Answer: (3) 50 kN/m³

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  3. JE Civil 2025 · 2 November · Q63 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Lime stabilization is very effective in treating

    1. Sandy soil
    2. Silty soil
    3. Non-plastic soil
    4. Plastic clayey soil
    Show answer

    Answer: (4) Plastic clayey soil

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  4. JE Civil 2025 · 2 November · Q64 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Soil which contains finest grain particles

    1. Fine sand
    2. Sand
    3. Clay
    4. Silt
    Show answer

    Answer: (3) Clay

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  5. JE Civil 2025 · 2 November · Q65 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The minimum water content at which the soil just begins to crumble when rolled into threads of 3 mm in diameter, is known as

    1. Liquid limit
    2. Plastic limit
    3. Shrinkage limit
    4. Permeability limit
    Show answer

    Answer: (2) Plastic limit

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  6. JE Civil 2025 · 2 November · Q66 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Consider soil as a three-phase system, the ratio of (Liquid Limit − Natural water Content)/Plasticity index for the soil mass is called

    1. Liquidity index
    2. Shrinkage ratio
    3. Consistency index
    4. Toughness index
    Show answer

    Answer: (3) Consistency index

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  7. JE Civil 2025 · 2 November · Q67 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Which of the following is a measure of particle size range?

    1. Effective size
    2. Uniformity coefficient
    3. Effective diameter
    4. Elongation index
    Show answer

    Answer: (2) Uniformity coefficient

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  8. JE Civil 2025 · 2 November · Q68 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    From a laboratory proctor compaction test data, the mass of the soil and water content is found to be 1100 g and 10% respectively. The volume of the proctor mould used is 1000 cm³, then the dry density (γd) of the soil is

    1. 1 g/cm³
    2. 1.10 g/cm³
    3. 1.50 g/cm³
    4. 1.15 g/cm³
    Show answer

    Answer: (1) 1 g/cm³

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  9. JE Civil 2025 · 2 November · Q69 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    In an unconfined compression test, a saturated clay sample, fails under a load of 150N. Consider final cross-section area (Af) = 2250 mm². Then the shear resistance (cohesion) of the sample is

    1. 66.21 kPa
    2. 34.95 kPa
    3. 33.33 kPa
    4. 15 kPa
    Show answer

    Answer: (3) 33.33 kPa

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  10. JE Civil 2025 · 2 November · Q70 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Consider the following pairs i. Standard Proctor Test — 1. [C, φ], apparent cohesion and angle of internal friction ii. Modified Proctor Test — 2. 03 layers, 310 mm height of drop iii. Direct Shear Test — 3. 05 layers, 450 mm height of drop iv. Triaxial Test — 4. [C′, φ′], strength parameter Which of the pair given below is correctly matched?

    1. (i)-(1), (ii)-(2), (iii)-(4), (iv)-(3)
    2. (i)-(2), (ii)-(3), (iii)-(1), (iv)-(4)
    3. (i)-(3), (ii)-(2), (iii)-(1), (iv)-(4)
    4. (i)-(4), (ii)-(3), (iii)-(1), (iv)-(2)
    Show answer

    Answer: (2) (i)-(2), (ii)-(3), (iii)-(1), (iv)-(4)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  11. JE Civil 2025 · 2 November · Q86 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    If N = Number of layers, W = Weight of the hammer, H = Height of fall, then which of the following option is correct for California Bearing Ratio (CBR) Test using heavy compaction?

    1. N = 3, W = 4.89 kg and H = 31 cm
    2. N = 3, W = 4.89 kg and H = 45 cm
    3. N = 5, W = 4.89 kg and H = 45 cm
    4. N = 5, W = 4.89 kg and H = 31 cm
    Show answer

    Answer: (3) N = 5, W = 4.89 kg and H = 45 cm

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  12. JE Civil 2025 · 2 November · Q87 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The coefficient of uniformity is defined as

    1. Cu = D₃₀/D₁₀
    2. Cu = D₆₀/D₁₀
    3. Cu = [D₃₀]²/D₁₀
    4. Cu = D₃₀/(D₁₀ × D₆₀)
    Show answer

    Answer: (2) Cu = D₆₀/D₁₀

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  13. JE Civil 2023 · 19 November · Q12 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The soil has a bulk density of 44 kN/m³ and water content 10%. The dry density of soil is

    1. 4.4 kN/m³
    2. 10 kN/m³
    3. 20 kN/m³
    4. 40 kN/m³
    Show answer

    Answer: (4) 40 kN/m³

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  14. JE Civil 2023 · 19 November · Q14 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Considering i. The structural resistance to displacement of the soil ii. Frictional resistance between the individual soil particles iii. Cohesion between the surface of the soil particles. The Shear strength of a soil basically made up of these statements

    1. Only (i) and (ii)
    2. Only (ii) and (iii)
    3. Only (i), and (iii)
    4. (i), (ii) and (iii)
    Show answer

    Answer: (4) (i), (ii) and (iii)

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  15. JE Civil 2023 · 19 November · Q48 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Which of the following properties depend on effective stress?

    1. Shear strength
    2. Compressibility
    3. Permeability
    4. All of the above
    Show answer

    Answer: (4) All of the above

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  16. JE Civil 2023 · 19 November · Q76 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    Select the correct statement.

    1. Unit weight of dry soil is greater than unit weight of wet soil.
    2. For dry soils, dry unit weight is less than total unit weight.
    3. Unit weight of soil increases due to submergence in water
    4. Unit weight of soil decreases due to submergence in water.
    Show answer

    Answer: (4) Unit weight of soil decreases due to submergence in water.

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  17. JE Civil 2023 · 19 November · Q77 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    In a triaxial compression test when drainage is allowed during the first stage (i. e. application of cell pressure) only and not during the second stage (i. e. application of deviator stress at constant cell pressure), the test is known as

    1. Consolidated drained test.
    2. Consolidated undrained test.
    3. Unconsolidated drained test.
    4. Unconsolidated undrained test.
    Show answer

    Answer: (2) Consolidated undrained test.

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  18. JE Civil 2023 · 19 November · Q101 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The rollers ideally suited for cohesive soils are

    1. Sheep foot roller
    2. Vibratory roller
    3. Smooth wheeled roller
    4. Pneumatic roller
    Show answer

    Answer: (1) Sheep foot roller

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  19. JE Civil 2023 · 19 November · Q102 · Soil Mechanics & Foundations · Soil Mechanics & Foundations

    The ratio of unconfined compressive strength of an undisturbed sample of soil to that of a remoulded sample, at the same water content is known as

    1. Activity
    2. Sensitivity
    3. Damping
    4. Plasticity
    Show answer

    Answer: (2) Sensitivity

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.