TGPSC HMWSSB Manager Electronic Devices & IC Technology previous year questions with answers
Every Electronic Devices & IC Technology question asked in the TGPSC HMWSSB Manager (Engineering) papers on this site, grouped by topic. Answers come from TSPSC's final key; each has a short explanation (free here for a sample, all of them in the practice app).
Practise Electronic Devices & IC Technology onlineSemiconductor Physics
Doping materials are called impurities because they
- change the temperature of the material
- alter the crystal structure of the pure semiconductor
- change the chemical properties of semiconductors
- decrease the number of charge carriers
Show answer
Answer: (3) change the chemical properties of semiconductors
Dopants are foreign (group III or group V) atoms added to an otherwise pure (intrinsic) semiconductor, so the material is no longer chemically pure: its chemical make-up and hence its properties change, which is why they are called impurities. They sit substitutionally in the lattice in parts per million, so the crystal structure is not altered, and they increase (not decrease) the number of charge carriers.
An intrinsic semiconductor at absolute zero temperature
- has large number of holes
- has a large number of electrons
- behaves like an insulator
- behaves like a metallic conductor
Show answer
Answer: (3) behaves like an insulator
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Diodes & Transistors
A diode clamper also referred to as a
- series rectifier
- series clamper
- shunt rectifier
- shunt clamper
Show answer
Answer: (3) shunt rectifier
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The Ebers-Moll model is applicable to
- Junction FET
- UJT
- NMOS
- BJT
Show answer
Answer: (4) BJT
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The circuit shown in figure is a
- positive peak clipper
- positive clamper
- differentiator
- negative clamper
Show answer
Answer: (2) positive clamper
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is not associated with a PN junction?
- depletion capacitance
- junction capacitance
- charge storage capacitance
- channel length modulation
Show answer
Answer: (4) channel length modulation
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Zener diode break down voltage———with temperature
- decreases
- constant
- increases
- may increase or decrease
Show answer
Answer: (1) decreases
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The output V-I characteristics of an enhancement type MOSFET has
- an ohmic region at low voltage value followed by a saturation region at higher voltages
- an ohmic region at large voltage values preceded by a saturation region at lower voltages
- only an ohmic region
- only a saturation region
Show answer
Answer: (1) an ohmic region at low voltage value followed by a saturation region at higher voltages
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
IC Fabrication
In IC technology, dry oxidation as compared to wet oxidation produces
- superior quality oxide with a lower growth rate
- superior quality oxide with a higher growth rate
- inferior quality oxide with a lower growth rate
- inferior quality oxide with a higher growth rate
Show answer
Answer: (1) superior quality oxide with a lower growth rate
Dry oxidation (Si + O₂ → SiO₂) grows a dense, low-defect oxide of high quality, used for MOS gate oxides, but it grows slowly. Wet oxidation (Si + 2H₂O → SiO₂ + 2H₂) is much faster because H₂O diffuses through the oxide more easily, but the oxide is less dense and is used for thick field oxides.
Photo masking
- controls the depth of diffusion
- is used to prevent ambient light shining on the silicon slice
- is used in the process to remove selected regions of silicon oxide
- reduce the size of the circuit elements
Show answer
Answer: (3) is used in the process to remove selected regions of silicon oxide
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.