Learn with Anil · TGPSC AMVI (Assistant Motor Vehicles Inspector) PYQsPractise online →Subscribe ₹149

TGPSC AMVI Materials, Manufacturing & Metrology previous year questions with answers

Every Materials, Manufacturing & Metrology question asked in the TGPSC AMVI (Assistant Motor Vehicles Inspector) papers on this site, grouped by topic. Answers come from TSPSC's preliminary key; each has a short explanation (free here for a sample, all of them in the practice app).

Practise Materials, Manufacturing & Metrology online

Engineering Materials

  1. AMVI 2023 Paper 2 (Automobile) · Q108 · Materials, Manufacturing & Metrology · Engineering Materials

    Nylon is a ______.

    1. thermoplastic
    2. resin
    3. thermoset
    4. elastomer
    Show answer

    Answer (TSPSC's preliminary key): (1) thermoplastic

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  2. AMVI 2023 Paper 2 (Automobile) · Q109 · Materials, Manufacturing & Metrology · Engineering Materials

    The property which allows material to undergo plastic deformation under tensile load before fracture is ______.

    1. brittleness
    2. ductility
    3. fatigue
    4. resilience
    Show answer

    Answer (TSPSC's preliminary key): (2) ductility

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  3. AMVI 2023 Paper 2 (Automobile) · Q110 · Materials, Manufacturing & Metrology · Engineering Materials

    Which of the following is a test used to measure hardness of the material?

    1. Disk test
    2. Izod test
    3. Charpy test
    4. Vickers test
    Show answer

    Answer (TSPSC's preliminary key): (4) Vickers test

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  4. AMVI 2023 Paper 2 (Automobile) · Q111 · Materials, Manufacturing & Metrology · Engineering Materials

    The permanent elongation of a component under a static load maintained for a long period of time is called ______.

    1. Plasticity
    2. Creep
    3. Fatigue fracture
    4. Residual stress
    Show answer

    Answer (TSPSC's preliminary key): (2) Creep

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  5. AMVI 2023 Paper 2 (Automobile) · Q112 · Materials, Manufacturing & Metrology · Engineering Materials

    When white cast iron is annealed in an atmosphere of carbon monoxide and carbon dioxide, at temperature between 800°C and 900°C for several hours depending on size, we obtain ______.

    1. compacted graphite iron
    2. nodular iron
    3. gray cast iron
    4. malleable iron
    Show answer

    Answer (TSPSC's preliminary key): (4) malleable iron

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  6. AMVI 2023 Paper 2 (Automobile) · Q113 · Materials, Manufacturing & Metrology · Engineering Materials

    The heating process by which hardness is reduced and toughness is improved is called ______.

    1. quenching
    2. cyaniding
    3. tempering
    4. carburizing
    Show answer

    Answer (TSPSC's preliminary key): (3) tempering

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  7. AMVI 2023 Paper 2 (Automobile) · Q123 · Materials, Manufacturing & Metrology · Engineering Materials

    Match the following elements with its effect on the steel.

    ElementsEffect on the steel
    I. Calcium1. Improves hardenability
    II. Boron2. Improves resistance to atmospheric corrosion
    III. Lead3. Improves toughness and formability
    IV. Copper4. Improves machinability
    1. I-3, II-4, III-1, IV-2
    2. I-2, II-1, III-4, IV-3
    3. I-3, II-1, III-4, IV-2
    4. I-2, II-4, III-1, IV-3
    Show answer

    Answer (TSPSC's preliminary key): (3) I-3, II-1, III-4, IV-2

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  8. AMVI 2023 Paper 2 (Automobile) · Q124 · Materials, Manufacturing & Metrology · Engineering Materials

    Which one of the following is a correctly matched pair?

    1. Grey cast iron : Graphite exists largely in form of flakes
    2. White cast iron : Graphite in a spherical form
    3. Ductile iron : Graphite in form of short, thick interconnected flakes
    4. Compacted graphite iron : Do not have any carbon flakes
    Show answer

    Answer (TSPSC's preliminary key): (1) Grey cast iron : Graphite exists largely in form of flakes

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

Manufacturing & Workshop

  1. AMVI 2023 Paper 2 (Automobile) · Q88 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    What does the weld symbol ‘—’ represents according to IS : 813 – 1961?

    1. Field weld
    2. Chipping finish
    3. Flush contour
    4. Flash welding
    Show answer

    Answer (TSPSC's preliminary key): (3) Flush contour

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  2. AMVI 2023 Paper 2 (Automobile) · Q106 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is a finishing process of manufacturing?

    1. Soldering
    2. Extrusion
    3. Burnishing
    4. Milling
    Show answer

    Answer (TSPSC's preliminary key): (3) Burnishing

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  3. AMVI 2023 Paper 2 (Automobile) · Q107 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is a permanent mould casting process?

    1. Investment casting process
    2. Die casting
    3. Sand casting
    4. Lost foam casting
    Show answer

    Answer (TSPSC's preliminary key): (2) Die casting

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  4. AMVI 2023 Paper 2 (Automobile) · Q114 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    The machining process of making a hole by removing a disk shaped piece from a flat plate is called ______.

    1. trepanning
    2. gun drilling
    3. boring
    4. tapping
    Show answer

    Answer (TSPSC's preliminary key): (1) trepanning

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  5. AMVI 2023 Paper 2 (Automobile) · Q115 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is a correct relation of material removal rate for milling? (l = length of cut, w = width of the cut, d = depth of cut, t = cutting time, f = feed per tooth, v = feed rate)

    1. MRR = (l × w)/(d × t)
    2. MRR = (f × d × t)/l
    3. MRR = (w × d)/v
    4. MRR = (l × w × d)/t
    Show answer

    Answer (TSPSC's preliminary key): (4) MRR = (l × w × d)/t

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  6. AMVI 2023 Paper 2 (Automobile) · Q116 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    The phenomenon of wandering of arc that occurs in DC welding is called ______.

    1. Arc blow
    2. Spattering
    3. Underfilling
    4. Lamellar tears
    Show answer

    Answer (TSPSC's preliminary key): (1) Arc blow

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  7. AMVI 2023 Paper 2 (Automobile) · Q117 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is correct regarding the process of reaming? I. Reaming is an operation used to achieve a high grade of surface finish on a hole. II. The tool used in reaming operation has multiple cutting edges.

    1. Only I
    2. Only II
    3. Both I and II
    4. Neither I nor II
    Show answer

    Answer (TSPSC's preliminary key): (3) Both I and II

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  8. AMVI 2023 Paper 2 (Automobile) · Q118 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is correct regarding the lathe operations? I. Process of reducing the diameter of a workpiece over a very narrow surface is called knurling. II. Knurling is done at the slowest speed available in a lathe.

    1. Only I
    2. Only II
    3. Both I and II
    4. Neither I nor II
    Show answer

    Answer (TSPSC's preliminary key): (2) Only II

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  9. AMVI 2023 Paper 2 (Automobile) · Q119 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is correct about broaching? I. It is a process of machining a surface with a special multipoint tool. II. Gears cannot be manufactured using a broaching process.

    1. Only I
    2. Only II
    3. Both I and II
    4. Neither I nor II
    Show answer

    Answer (TSPSC's preliminary key): (1) Only I

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  10. AMVI 2023 Paper 2 (Automobile) · Q120 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is correct regarding forging? I. Upsetting is a process of increasing cross sectional dimensions when forging. II. Process of cutting large holes of various shapes by using a chisel over a hole in the sewage block is called setting down. III. One of the advantages of open die forging is, it can be employed for long run production.

    1. Only I
    2. I and II only
    3. II and III only
    4. Only III
    Show answer

    Answer (TSPSC's preliminary key): (1) Only I

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  11. AMVI 2023 Paper 2 (Automobile) · Q121 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is correct regarding electron beam machining? I. It can be used on all materials. II. Material removal rate is low and vacuum is needed for operation. III. The voltage required for electron beam machining is 1150 kV.

    1. I and III only
    2. I and II only
    3. II and III only
    4. Only III
    Show answer

    Answer (TSPSC's preliminary key): (2) I and II only

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  12. AMVI 2023 Paper 2 (Automobile) · Q122 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Which of the following is correct regarding advantages of cold working? I. Ductility of metal is improved. II. Minimum contamination during cold working compare to hot working. III. Good surface finish and better dimensional accuracy than hot working.

    1. Only I
    2. Only II
    3. II and III only
    4. I and II only
    Show answer

    Answer (TSPSC's preliminary key): (3) II and III only

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  13. AMVI 2023 Paper 2 (Automobile) · Q125 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Arrange the following brazing alloys in order of their increasing melting point. I. Copper = 50 percent, Zinc = 50 percent II. Copper = 70 percent, Zinc = 30 percent III. Copper = 60 percent, Zinc = 40 percent

    1. I, II, III
    2. II, III, I
    3. III, II, I
    4. I, III, II
    Show answer

    Answer (TSPSC's preliminary key): (4) I, III, II

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  14. AMVI 2023 Paper 2 (Automobile) · Q126 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Arrange the following three region in decreasing order of percentage of heat generated during metal cutting. I. The shear zone II. The chip tool interface region III. The tool-work interface region

    1. III, II, I
    2. I, II, III
    3. II, III, I
    4. II, I, III
    Show answer

    Answer (TSPSC's preliminary key): (2) I, II, III

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  15. AMVI 2023 Paper 2 (Automobile) · Q127 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Arrange the following steps in a correct order (first to last) regarding thermit welding. I. After cutting, pouring and heating gates and risers a flame is directed into heating oven to drain out wax. II. Molten iron run into the mould which fuses with part to be welded. III. Wax pattern of desired size and shape is prepared around joint. IV. The thermit mixture packed in the crucible of conical shape formed from sheet iron casting lined with heat resisting cement is ignited.

    1. I, II, IV, III
    2. III, I, IV, II
    3. II, IV, III, I
    4. IV, III, II, I
    Show answer

    Answer (TSPSC's preliminary key): (2) III, I, IV, II

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  16. AMVI 2023 Paper 2 (Automobile) · Q128 · Materials, Manufacturing & Metrology · Manufacturing & Workshop

    Arrange the following steps in a correct order (first to last) of greens and mouldings. I. Making the mould II. Closing and weighing III. Core setting IV. Preparation of the pattern

    1. II, I, III, IV
    2. IV, I, III, II
    3. III, II, IV, I
    4. II, IV, I, III
    Show answer

    Answer (TSPSC's preliminary key): (2) IV, I, III, II

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

Metrology & Measurement

  1. AMVI 2023 Paper 2 (Automobile) · Q65 · Materials, Manufacturing & Metrology · Metrology & Measurement

    The prefix used to show multiplying factor of 10⁻¹² is ______.

    1. tera
    2. nano
    3. pico
    4. fermi
    Show answer

    Answer (TSPSC's preliminary key): (3) pico

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.

  2. AMVI 2023 Paper 2 (Automobile) · Q85 · Materials, Manufacturing & Metrology · Metrology & Measurement

    For the limit system, what is the difference between the basic dimensions of the mating parts is called?

    1. Allowance
    2. Fundamental deviation
    3. Tolerance
    4. Mean deviation
    Show answer

    Answer (TSPSC's preliminary key): (1) Allowance

    Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.