TGPSC AMVI Automobile Chassis & Transmission previous year questions with answers
Every Automobile Chassis & Transmission question asked in the TGPSC AMVI (Assistant Motor Vehicles Inspector) papers on this site, grouped by topic. Answers come from TSPSC's preliminary key; each has a short explanation (free here for a sample, all of them in the practice app).
Practise Automobile Chassis & Transmission onlineChassis & Body
Which one of the following is an advantage of chassis with engine at front and drive is given to the wheels from rear of a vehicle?
- Increased efficiency of cooling system
- Inadequate space behind the rear seat for the luggage
- Elimination of propeller shaft
- The clutch, gear box and differential are usually made as one unit results in cost reduction
Show answer
Answer (TSPSC's preliminary key): (1) Increased efficiency of cooling system
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which one of the following is a defect that may be found in chassis body of an automobile?
- Build up edges
- Broken welds
- Heat affected zone
- Toe out
Show answer
Answer (TSPSC's preliminary key): (2) Broken welds
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
For an automotive body, the magnitude of the drag force depends on ______.
- shear strength of automotive body
- magnitude of gravity
- velocity of automotive body
- strength of automotive body
Show answer
Answer (TSPSC's preliminary key): (3) velocity of automotive body
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which one of the following load acts on a chassis when a vehicle crosses a broken patch of road?
- Inertia load
- Short duration load
- Overload
- Impact load
Show answer
Answer (TSPSC's preliminary key): (2) Short duration load
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The actual average rate of coverage by the farm machine, based upon total field time is called ______.
- effective operating time
- theoretical field capacity
- field efficiency
- effective field capacity
Show answer
Answer (TSPSC's preliminary key): (4) effective field capacity
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
An assemblage of one or more winding drums mounted on a frame of a crane is called ______.
- Main clutch
- Winch
- Boom
- Flange
Show answer
Answer (TSPSC's preliminary key): (2) Winch
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following vehicle have rotating beam attached to a vertical mast and supporting a hoist?
- Bulldozer
- Fork lift truck
- Loaders
- Jib Crane
Show answer
Answer (TSPSC's preliminary key): (4) Jib Crane
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following vehicle designed for transporting large quantities of bulk material like gravel over short distance?
- Fork lift truck
- Loaders
- Dumpers
- Bulldozer
Show answer
Answer (TSPSC's preliminary key): (3) Dumpers
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Clutch & Gearbox
Which one of the following is a formula of the effective mean radius of a clutch for uniform pressure condition? (Where r₁ is inner radius and r₂ is outer radius).
- (1/3)[(r₂³ − r₁³)/(r₂² − r₁²)]
- (2/3)[(r₂³ − r₁³)/(r₂² − r₁²)]
- (r₂ + r₁)/2
- (2/3)[(r₁³ − r₂³)/(r₂² − r₁²)]
Show answer
Answer (TSPSC's preliminary key): (2) (2/3)[(r₂³ − r₁³)/(r₂² − r₁²)]
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In gear box, the device that is used to lock collar into the gear is called ______.
- reverse gear
- dog clutch
- electromagnetic clutch
- diaphragm clutch
Show answer
Answer (TSPSC's preliminary key): (2) dog clutch
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Match the following symptoms with their causes for troubleshooting of gear box.
Symptoms Causes I. Oil leaks 1. Excessive wear on gear shift control II. Gear jumps out 2. Defective synchronizer III. Gears clash while they are shifted 3. Broken gaskets 4. Heavy heat contact on the ring gear - I-1, II-2, III-3
- I-3, II-1, III-2
- I-2, II-1, III-4
- I-4, II-3, III-1
Show answer
Answer (TSPSC's preliminary key): (2) I-3, II-1, III-2
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Arrange the following position in decreasing order of power transmission based on the position of gear shift lever of a vehicle. I. Low position II. Reverse position III. Neutral position
- I, II, III
- II, I, III
- III, I, II
- III, II, I
Show answer
Answer (TSPSC's preliminary key): (1) I, II, III
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Arrange the following statements in correct order (first to last) regarding fluid coupling. I. The prime mover starts rotating. II. The oil is thrown outwards by centrifugal action by pump impeller. III. The oil then enters the impeller pump again. IV. The pump impeller starts rotating. V. The oil enters the turbine runner and exerts force on runner blades. VI. The torque increases results in rotation of turbine runner after overcoming inertia effects.
- I, V, II, IV, III, VI
- I, II, III, V, IV, VI
- I, IV, II, V, VI, III
- II, III, I, VI, IV, V
Show answer
Answer (TSPSC's preliminary key): (3) I, IV, II, V, VI, III
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is correct regarding clutches? I. The material used as a friction surface of clutch should have low heat conductivity. II. The material used as a friction surface for clutches should have high and uniform coefficient of friction.
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer (TSPSC's preliminary key): (2) Only II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Drive Line, Axles & Differential
The terms used for a combination of transmission and rear axles as a unit of a vehicle is ______.
- live axle
- tandem axle
- split axle
- trans axle
Show answer
Answer (TSPSC's preliminary key): (4) trans axle
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statement is correct about front axles of a vehicle? I. The front wheels are mounted on stub axles which are connected to the front axle by king pin. II. When brakes are provided at the front wheels the front axle withstand bending stresses only.
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer (TSPSC's preliminary key): (1) Only I
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statement is correct regarding transmission system of automobiles? I. The main advantage of an overdrive is prolonged engine life since the engine turns slower. II. A slip joint is attached to the driven yoke in order to increase or decrease the propeller shaft.
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer (TSPSC's preliminary key): (3) Both I and II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following statement is correct regarding rear axles of a vehicle? I. The Banjo axle arrangement is a central housing that contains the final drive and it is fitted with a tube on each side to carry the half axles and bearings. II. The main advantage of three-quarter floating rear axle over the half floating axle is that the major part of the load is taken by the axle and not by the axle casing. III. A full floating rear axle is not supported by bearing at either end, is very strong and used for heavy duty vehicles.
- Only II
- I and II
- Only III
- II and III
Show answer
Answer (TSPSC's preliminary key): (3) Only III
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is correct regarding causes of axle failure of a vehicle? I. Lubricant is not maintained at the required level. II. The vehicle is over loaded. III. Using of lubricant of correct grade.
- Only I
- II and III
- I and II
- Only III
Show answer
Answer (TSPSC's preliminary key): (3) I and II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is a correctly matched pair universal joint of a vehicle with their classification?
- Tracta type : Variable velocity joints
- Rzeppa type : Variable velocity joint
- Ball and Trunion type : Variable velocity joints
- Ring type : Constant velocity joint
Show answer
Answer (TSPSC's preliminary key): (3) Ball and Trunion type : Variable velocity joints
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Brakes
Arrange the following in a correct order (first to last) for air brakes of a vehicle. I. The air pressure act on a diaphragm of brake chamber. II. Brake shoes expands outwards and hold the moving brake drums. III. The foot pedal is pressed down. IV. The diaphragm is pushed outward in the brake chamber causing movement of brake shoe operating cam.
- III, IV, I, II
- III, I, IV, II
- III, IV, II, I
- III, II, IV, I
Show answer
Answer (TSPSC's preliminary key): (2) III, I, IV, II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Steering & Suspension
In which of the following the carriage unit of a car rolls about a transverse axis?
- Rolling
- Yawing
- Pitching
- Bending
Show answer
Answer (TSPSC's preliminary key): (3) Pitching
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which one of the following is a function of the shackle in the context of a leaf spring?
- It helps in accommodating the change in the length of the spring.
- It is used to keep leaf spring in position on the axle.
- It is used to provide progressive stiffness against increasing load.
- It provides lubrication between the leaf spring.
Show answer
Answer (TSPSC's preliminary key): (1) It helps in accommodating the change in the length of the spring.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is correct regarding steering mechanism of a vehicle? I. In order to avoid skidding, the two front wheels instantaneous centre should not coincide with the two rear wheels instantaneous centre. II. The fundamental equation for correct steering is cot φ − cot θ = c/b. Where, c = distance between the pivots of front axle. b = wheel base θ = inner wheel turning angle φ = outer wheel turning angle
- Only I
- Only II
- Both I and II
- Neither I nor II
Show answer
Answer (TSPSC's preliminary key): (2) Only II
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Wheels & Tyres
If vehicle is taking a turn, what is the ratio of side force sustained to slip angle called?
- Camber force
- Cornering power
- Frictional power
- Camber angle
Show answer
Answer (TSPSC's preliminary key): (2) Cornering power
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following is correctly matched pair regarding the tyres?
- Ply : The cross grooved tyre tread
- Carcass : An aunclar torridal shaped inflatable envelope made of an elastic material
- Ribs : The layer of rubber coated parallel cords
- Bead : Part which is shaped to fit the rim and hold the tyre on it
Show answer
Answer (TSPSC's preliminary key): (4) Bead : Part which is shaped to fit the rim and hold the tyre on it
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.