JKSSB JE Civil Transportation Engineering previous year questions with answers
Every Transportation Engineering question asked in the JKSSB JE Civil papers on this site, grouped by topic. Answers come from JKSSB's key; each has a short explanation (free here for a sample, all of them in the practice app).
Practise Transportation Engineering onlineHighway Engineering
For a vehicle negotiating a curve, centrifugal force "P", is i. Directly proportional to the weight of vehicle ii. Inversely proportional to square of velocity iii. Inversely proportional to radius of curve Which of the above statements are true?
- (i) and (ii)
- (ii) and (iii)
- (i) and (iii)
- (i), (ii) and (iii)
Show answer
Answer: (3) (i) and (iii)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The penetration test of bitumen is conducted at X, measuring the penetration of needle loaded with Y load for Z time. The correct values are
- X = 25°C; Y = 100 gm; Z = 5 sec
- X = 25°C; Y = 100 gm; Z = 10 sec
- X = 27°C; Y = 50 gm; Z = 60 sec
- X = 27°C; Y = 100 gm; Z = 10 sec
Show answer
Answer: (1) X = 25°C; Y = 100 gm; Z = 5 sec
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
For carrying out bituminous patch work during rainy season, the most suitable binder is
- Bitumen
- Bituminous emulsion
- Cutback bitumen
- Road tar
Show answer
Answer: (2) Bituminous emulsion
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Pick the right sequence of the different layers of a flexible pavement construction i. Base course construction ii. Subbase course construction iii. Surface course and seal coat application iv. Natural subgrade and compacted subgrade construction v. Prime coat, binder course and tack coat application Choose the correct answer from the options given below
- (i), (ii), (iii), (iv), (v)
- (i), (iii), (v), (ii), (iv)
- (iv), (ii), (i), (v), (iii)
- (iv), (v), (i), (ii), (iii)
Show answer
Answer: (3) (iv), (ii), (i), (v), (iii)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Alligator or map cracking is the most common type of failure in
- Bituminous surfacing
- Water Bound Macadam (WBM) surfacing
- Wet Mix Macadam (WMM) surfacing
- Telford and Macadam surfacing
Show answer
Answer: (1) Bituminous surfacing
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
A vehicle was stopped in 2 second by fully jamming the break and skid marks measured 20 m then average skid resistance is (consider g = 10 m/sec²)
- 0.35
- 0.50
- 1.0
- 2.2
Show answer
Answer: (3) 1.0
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The wall which are necessary on the hill side of roadway where natural earth has to be retained from sliding is known as
- Retaining wall
- Breast wall
- Parapet wall
- Cavity wall
Show answer
Answer: (2) Breast wall
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Consider the following pairs i. Los angeles abrasion — 1. Gradation ii. Size — 2. Toughness iii. Durability — 3. Hardness iv. Impact — 4. Soundness Which of the pair given below is correctly matched?
- (i)-(2), (ii)-(1), (iii)-(3), (iv)-(4)
- (i)-(2), (ii)-(4), (iii)-(3), (iv)-(1)
- (i)-(3), (ii)-(1), (iii)-(4), (iv)-(2)
- (i)-(3), (ii)-(4), (iii)-(1), (iv)-(2)
Show answer
Answer: (3) (i)-(3), (ii)-(1), (iii)-(4), (iv)-(2)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The fundamental relationship between space-mean speed (u), traffic density (k) and traffic flow (q) is
- q = u × k
- q = u/k
- q = k/u
- q = k²/u
Show answer
Answer: (1) q = u × k
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The standard loads corresponding to 2.5 mm and 5.0 mm deformation in California Bearing Ratio (CBR) Test are.
- 1350 N and 2055 N,
- 2055 N and 1350 N,
- 1350 kg and 2055 kg,
- 2055 kg and 1350 kg.
Show answer
Answer: (3) 1350 kg and 2055 kg,
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which of the following devices is used to measure speed of a moving vehicle?
- Weigh bridge
- LIDAR gun
- Noise meter
- Loop detector
Show answer
Answer: (2) LIDAR gun
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What were the main recommendations of Jayakar Committee: a. Central Road Fund was founded in 1929. b. Indian Road Congress was established in 1930. c. Central Road Research Institute started in 1950. d. More stress was given on long term planning programme for a period of 20 years. Which of the following statements is/are correct?
- a and d
- a, c and d
- b and c
- b, c, and d
Show answer
Answer: (1) a and d
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Choose the correct relation between gradient and camber?
- Gradient = Camber ×0.5
- Gradient = Camber ×2
- Camber = Gradient ×1.5
- Camber = Gradient
Show answer
Answer: (2) Gradient = Camber ×2
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
If b is the wheel track of a vehicle and h is the height of centre of gravity above road surface, then to avoid overturning and lateral skidding on a horizontal curve, the centrifugal ratio should always be
- Less than b/2h and greater than coefficient of lateral friction.
- Less than b/2h and also less than coefficient of lateral friction.
- Greater than b/2h and less than coefficient of lateral friction.
- Greater than b/2h and also greater than coefficient of lateral friction.
Show answer
Answer: (2) Less than b/2h and also less than coefficient of lateral friction.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In CBR test the value of CBR is calculated at
- 2.5 mm penetration only.
- 5.0 mm penetration only.
- 7.5 mm penetration only.
- Both 2.5 mm and 5.0 mm penetrations.
Show answer
Answer: (4) Both 2.5 mm and 5.0 mm penetrations.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
In a bituminous pavement, alligator cracking is mainly due to
- Inadequate wearing course.
- Inadequate thickness of sub-base course of pavement.
- Use of excessive bituminous material.
- Fatigue arising from repeated stress applications.
Show answer
Answer: (4) Fatigue arising from repeated stress applications.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the most common camber for earthen roads?
- 1 in 20
- 1 in 24
- 1 in 30
- 1 in 36
Show answer
Answer: (3) 1 in 30
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Railways, Bridges & Other Transport
Which of the following rails is most preferred by Indian railway
- Flat footed rails
- Bull head rails
- Double headed rails
- Thin headed rails
Show answer
Answer: (1) Flat footed rails
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Gauge is the horizontal distance measured between
- Centre to center of two rails
- Inner or running faces of two rails
- Outer to inner face of two rails
- Inner to Outer face of two rails
Show answer
Answer: (2) Inner or running faces of two rails
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Two major constituents in the composition of steel used in rail are
- Carbon and Silicon
- Carbon and Sulphur
- Carbon and Manganese
- Carbon and Lithium
Show answer
Answer: (3) Carbon and Manganese
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The rising gradient on which a moving train takes the advantage of the preceding falling gradient, usually referred as
- Pusher gradient
- Neutral gradient
- Ruling gradient
- Momentum gradient
Show answer
Answer: (4) Momentum gradient
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The longitudinally movement of rails in a track is technically referred as,
- Hogging
- Buckling
- Creeping
- Tilting
Show answer
Answer: (3) Creeping
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The sleeping of driving wheels of locomotives on the rail surface causes,
- Wheel burns
- Hogging of rail
- Corrugation of rail
- Buckling of rail
Show answer
Answer: (1) Wheel burns
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The wear of the rail is maximum at
- Tunnel
- Sharp curve
- Coastal area
- Square crossing
Show answer
Answer: (2) Sharp curve
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Which among the following organization is the Research and Development (R&D) wing of Indian Railways
- IRCTC
- DRDO
- RDSO
- CRIS
Show answer
Answer: (3) RDSO
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Consider the following pairs i. Ballast — 1. Rail fastenings with concrete sleeper ii. Sleeper — 2. To hold the rail in proper gauge iii. Jim crow — 3. To bend the rail iv. Pandrol clip — 4. To Provide cushion effect to the track Which of the pair given below is correctly matched?
- (i)-(2), (ii)-(1), (iii)-(3), (iv)-(4)
- (i)-(2), (ii)-(4), (iii)-(3), (iv)-(1)
- (i)-(3), (ii)-(1), (iii)-(4), (iv)-(2)
- (i)-(4), (ii)-(2), (iii)-(3), (iv)-(1)
Show answer
Answer: (4) (i)-(4), (ii)-(2), (iii)-(3), (iv)-(1)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Creep is a phenomenon of
- Longitudinal movement of rails in a track
- Lateral movement of rails in a track
- Difference of level between sleeper and rail
- Transverse movement of rails in a track
Show answer
Answer: (1) Longitudinal movement of rails in a track
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Consider the following surveys i. Reconnaissance survey ii. Preliminary survey iii. Traffic survey iv. Location survey The correct sequence of surveys conducted to finalized the railway alignment is
- (i) (iii) (ii) (iv)
- (i) (iii) (iv) (ii)
- (iii) (i) (iv) (ii)
- (iii) (i) (ii) (iv)
Show answer
Answer: (4) (iii) (i) (ii) (iv)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
The switch angle depends on i. Heel divergence ii. Length of tongue rail iii. Flange-way clearance iv. Throw of switch The correct answer is
- (i) and (ii)
- (ii) and (iii)
- (iii) and (iv)
- (i) and (iv)
Show answer
Answer: (1) (i) and (ii)
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Calculate the number of sleepers required for 1 km railway track , it sleeper density is (n+4) for broad gauge and the length of one rail for a broad gauge is 13 m.
- 437
- 678
- 1308
- 17000
Show answer
Answer: (3) 1308
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Consider the following pairs. List - I — List - II i. Broad gauge — 1676 ii. Meter gauge — 762 iii. Narrow gauge — 1000 Which of the pairs given above is/are correctly matched?
- i
- ii
- iii
- None of the above
Show answer
Answer: (1) i
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Flangeway clearance is the distance
- Between the adjoining faces of the running rail and the check rail near the crossing.
- Between the gauge faces of the stock rail and the tongue rail.
- Through which the tongue rail moves laterally at the toe of the switch.
- None of the above.
Show answer
Answer: (1) Between the adjoining faces of the running rail and the check rail near the crossing.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Match List I with List II and select the correct answer from the combinations given below List - I — List - II a. Wire claw. — 1. To clean the ballast. b. Jim crow. — 2. To pack the ballast under sleeper. c. Beater. — 3. To bend the rails. d. Mallet. — 4. To sound the sleeper for packing. The correct combination is:
- a-1 b-3 c-2 d-4.
- a-1 b-4 c-3 d-2.
- a-2 b-1 c-3 d-4.
- a-2 b-3 c-1 d-4.
Show answer
Answer: (1) a-1 b-3 c-2 d-4.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
Wear of rails is maximum in
- Tangent track.
- Sharp curve.
- Tunnels.
- Coastal area.
Show answer
Answer: (2) Sharp curve.
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the maximum ruling gradient permitted in Indian Railways in plains?
- 1 in 500
- 1 in 150
- 1 in 100
- 1 in 50
Show answer
Answer: (2) 1 in 150
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.
What is the crossing number adopted by Indian Railways for high speeds?
- 1 in 8 1/2
- 1 in 16
- 1 in 12
- 1 in 20
Show answer
Answer: (2) 1 in 16 / (4) 1 in 20
Explanation: open it in the practice app. It needs the ₹149 All-in-One Pass: one payment for every exam on the site.